PHONE (800) 875-5285

Smartstat Thermostat

floor heating thermostat2

It self-learns! The SmartStat™ has an Early-Start mode. It will self-learn at what time it needs to start heating the floor to get you the floor temperature you want at the time you programmed it for.
It remembers! The SmartStat™ has a battery backup for power failure. The battery can keep up the time for a power loss of up to 2 hours. An EEPROM also keeps up the programs in memory for several years so a power failure doesn't affect them. If you have a power loss for more than 2 hours and the thermostat was running in the automatic mode, the time will reset to 0:00 o'clock and the program that is the nearest from that time will be reactivated and run. If your SmartStat™ was set in the manual or in the vacation mode, it will continue to keep up the temperature that it was set to before the power failure.
It saves energy! As it begins to increase the floor temperature, it will check its progress every 15 minutes but only use the kilowatt-minutes that you need. The SmartStat™ display will show you 1-to-5 heating flames, indicating that for the next 15-minutes it will energize the floor 20%-to-100% of the time. After it reaches the floor temperature that you requested, the in-floor sensor will cycle the system on-&-off and continuously adjust, SAVE energy and only use the kilowatt-hour that you need.

Previous Information on the SmartStat™ Thermostat

Chat Software