WeMo Light Switch User Manual + Pre-Install Troubleshooting
Troubleshooting. Before installing the WEMO Light Switch to your electrical line, meet the following electrical requirements below:
- A Neutral wire (Requires all three (3) AC electrical connections at the wall switch)
- A single pole light switch (not compatible with lights controlled by more than one switch)
- The light switch box must be two (2) inches deep
- The WEMO Light Switch is not designed to work with metal faceplates (it interferes with the Wi-Fi signal) and is recommended for residential and dry indoor locations only.
WeMo Light Switch User Manual can be found here - http://www.belkin.com/us/support-article?articleNu...
Latest version of the PDF is attached as well.