Timer T1033-B


Part Number: T1033-B
This support page provides publications, manuals, specifications, support articles, and common support questions


question-mark
Common Support Questions (7)

publication
Publications and Manuals (4)

specifications
Specifications (14)

Articles (3)

Similar Items (1)

Create a new Support Request

Common Support Questions


The breaker and wire sizes are selected based on the total amperage of the WarmlyYours heating system connected to a single thermostat. This information is on the WarmlyYours heating system's installation plan, electrical plan, or UL label. Based on guidelines from the National Electrical Code: loads up to 16 Amps may utilize 12 gauge wire with a 20-Amp breaker, and loads up to 12 Amps - 14 gauge wire with a 15-Amp breaker. Local code and/or other factors may change these guidelines.

Need more help? View support options

Press on the door for 3 seconds until 'MAN' is shown on the display. Press on the door for 3 seconds until 'AUTO' is shown on the display.

Need more help? View support options

The T1033 can hold up to 7 programs.

Need more help? View support options

Lift up the bottom of the door of the T1033 using a small screwdriver.

Need more help? View support options

Assure there is power to the timer. If there is power to the timer, then make sure the ON/OFF button is pushed all the way to the right - ON position. If this doesn't resolve the issue, press the RESET button using a paper clip. If none of these steps resolve the issue, then contact WarmlyYours at (800) 875-5285 to order a replacement controller.

Need more help? View support options

All thermostats are mandated at 42" height for handicap accessibility, most private residences are mounted at 52-60".

Please see this video on how to install a WarmlyYours nSpiration Series thermostat: https://www.warmlyyours.com/video-media/wire-nspiration-thermostat-to-electric-floor-heating-roll

Need more help? View support options

Solution:

The ground wire in the floor mat must be connected directly to the ground wire of the supply or to the house ground wire.


Need more help? View support options


Publications and Manuals



Specifications


Electrical

Connection Single pole, 2 wires, hot & neutral
Connection Method Hardwired
Maximum Load (Resistive Only) 2400 W - 120 V, 20 A Never use this much
Supply 120 VAC, 50/60Hz
Voltage 120 V

Logistics

Country of Origin (COO) China

Product Dimensions

Depth 1.7“
Length 4“
Width 1.5“

Controls

Display Large white backlit display with night light mode
Manual Override Works like an ordinary on/off switch

Identifiers

SKU T1033-B
UPC (GTIN-12) 881308045722

Warranty / Certifications

Warranty Limited 2-year warranty and lifetime technical support

Articles



Similar Items


Do you need support or specifications for a specific model? Identify your model below.



Speak to a radiant heating expert


Can’t find what you’re looking for? Create a Support Request