WarmlyYours
WarmlyYours.com
P:+1 (800) 875-5285
Mon-Fri, 7:30am-5:30pm CST
info@warmlyyours.com
F: +1 (800) 408-1100

TempZone Products and RedGard Waterproofing and Crack Prevention Membrane

Share:


How to install TempZone Floor Heating Products and RedGard Waterproofing and Crack Prevention Membrane from Custom Building Products.

1. Follow the cork and Floor Heat manufacturer’s instructions for bonding products to slab.

2. Then encapsulate heating system in ProLite® Premium Large Format Tile Mortar or MegaLite® Ultimate Crack Prevention Large Format Tile Mortar. 

3. Allow mortar to cure then apply RedGard® Waterproofing and Crack Prevention Membrane. 

4. Set the tile over the RedGard using either the ProLite or MegaLite to bond tile to RedGard.


http://www.custombuildingproducts.com/TDS/TDS-114.pdf

ProLite® Premium Large Format Tile Mortar TECHNICAL DATA SHEET

 

http://www.custombuildingproducts.com/TDS/TDS-112.pdf

MegaLite® Ultimate Crack Prevention Large Format Tile Mortar TECHNICAL DATA SHEET

 

http://www.custombuildingproducts.com/TDS/TDS-104.pdf

RedGard® Waterproofing and Crack Prevention Membrane TECHNICAL DATA SHEET



INFO FROM:

John Romero

Technical Service Specialist

Custom Building Products

Phone 562-968-2980 ext.6157

FAX 562-903-2697

(800) 272-8786

jromero@cbpmail.net

Written by Anatoliy Isayenko
Posted on
Subscribe for Updates