Programmable Timer Towel Warmer Control CO-TI-PLS750


Part Number: CO-TI-PLS750
This support page provides publications, manuals, specifications, support articles, and common support questions


question-mark
Common Support Questions (14)

publication
Publications and Manuals (5)

specifications
Specifications (13)

Articles (2)

Create a new Support Request

Common Support Questions


Yes, most of our wall-mounted towel warmers have a fixed power location in the lower right corner.  All of our heated towel racks are electric "dry" (liquid/oil-free) units and most can be installed "upside down". Doing so will result in the power location relocating from the lower right corner to the upper left corner.

Please see the installation video here:  https://www.warmlyyours.com/en-US/video-media/towel-warmer-install

Need more help? View support options

A WarmlyYours electric towel warmer can't be installed in a tub or shower enclosure. A WarmlyYours electric heated towel rack should be installed at least 24” away from a wet location like a shower, tub, etc. Always install a WarmlyYours electric towel warmer in compliance with all local building and electrical codes.

Need more help? View support options

Yes. WarmlyYours towel warmers are to be installed in accordance with the instructions in the manual and CEC, NEC, and local code guidelines relating to electrical fixtures in bathrooms. A towel warmer with a hardwired connection must be on a GFCI-protected circuit and be wired by a professional who is certified to do electrical wiring. Towel warmer models with plug-in connections should be used with a GFCI outlet. 

Need more help? View support options

WarmlyYours towel warmers are all 120VAC units. Towel warmers are available in wattages from 35 watts all the way up to 250 watts. A single towel warmer would typically range from 1-2 amps based on the model. Wire size and breaker size need to be selected based on the total amperage of the towel warmer(s). For towel warmers installed in bathrooms, a GFCI breaker is required.

Need more help? View support options

Yes, regular (non-dimming) light switch can be used as an external switch to control a towel warmer in addition to a built-in switch on the towel warmer itself. A GFCI breaker powering the switch may be required by local Electrical Code.

Need more help? View support options

Press the main button for 3 seconds, select the mode menu, the hand icon indicates manual operation and the clock icon indicates automatic operation.

Need more help? View support options

Press and hold the main button for the Menu option, select Prog.  Press and release the main button until the days of the week are flashing.  Use the right arrow to scroll through the days of the week until you get the word NONE.  This means there will be no schedule for that specific program.

Need more help? View support options

The LED in lower right corner of the thermostat will illuminate.

Need more help? View support options

Briefly press the main button to turn the switch on/off.

Need more help? View support options

Change the 'state' by pressing the main button briefly. The load state will flash 'On' or 'Off' to indicate the change and will remain in effect until the next program cycle is invoked or the main button is pressed again.

Need more help? View support options

21 "on" programs and 21 "off" programs.

Need more help? View support options

Within 2 seconds, press the left button twice then press the right button twice.

Need more help? View support options

By default the Programable Timer is set to +45 longitude and -75 latitude, this is fine for most North American cities. To find your cities coordinates, go to www.geonames.org, or simply use a GPS device.
Note: enter a negative number for a south latitude or a west longitude.

Need more help? View support options

The ambient room temperature is either too low or too high, affecting the thermostat's display.

Need more help? View support options


Publications and Manuals



Specifications


Electrical

Connection Single Pole or 3-Way
Connection Method Hardwired
Maximum Current 15 A
Maximum Load (Resistive Only) 1800 W
Supply 120 VAC, 60Hz
Voltage 120 V

Logistics

Country of Origin (COO) China

Product Dimensions

Depth 1“
Length 3“
Weight 0.375 lbs
Width 2“

Identifiers

SKU CO-TI-PLS750
UPC (GTIN-12) 881308047542

Articles




Speak to a radiant heating expert


Can’t find what you’re looking for? Create a Support Request