Floor Heating Accessories

Developed to give you peace of mind and ensure trouble-free installation of your radiant floor heating system.

WarmlyYours cold lead allows you to extend the amount of space between your floor-heating system and your thermostat.

This 10k ohms replacement/backup floor sensor, with a standard sensor probe, works with all floor heating controls available from WarmlyYours, including the nSpiration Series. It’s compatible with any electric floor heating thermostat that accepts 10k ohms sensors. It works to accurately sense the temperature... (FH-BACKUP-SENSOR)

This splice kit is used to repair a damaged section of TempZone twin-conductor floor heating cable.

A cost-effective alternative to using the Prodeso Cable Installation Membrane, GripStrips Floor Heating Cable Fixing Strips are used for securing TempZone™ floor heating cables in place on floors at predetermined spacing to ensure even heating. These plastic strips enable you to keep the heating cable secured in... (TC-GRIPSTRIP)

This is a great option for areas where the local code requires a separate conduit for low-voltage wires.

Getting the job done correctly has never been easier with this complete electrical kit. It contains everything an electrician needs to install and connect a thermostat with an electric radiant heating system in accordance with National Electric Code. Items Included: • 3” X 2” X 3 ½” Single-Gang Box • (25) 3/16" or... (FHE-ROUGH-IN-KIT-S2)

Every project is different. This kit was developed for projects in which the local electrical code does not require conduit for the low-voltage sensor wire or the power leads. It includes everything that an electrician will need for installing and connecting a thermostat with an electric radiant heating system.... (FHE-ROUGH-IN-KIT-S1)

The WarmlyYours 120 V Integration Kit connects your radiant floor heating system to third-party controls, giving you the ability to control your TempZone™ or Environ™ systems with the stand-alone thermostat or home automation system of your choice. The 120 V Integration Kit features an electric heating relay that... (INTEGRATION-KIT-120V)

WarmlyYours makes it easy to connect your floor heating system to your home automation system or stand-alone thermostat with our 240 V Integration Kit. The kit includes an electric heating relay with a built-in 24V/1.2VA/Class 2 transformer. Operating at a resistive load of 22 amps at 240 V, with epoxy soundproofing... (INTEGRATION-KIT-240V)