Radiant floor heating is a powerful solution for making rooms built on concrete slabs warm, inviting, and energy-efficient. But whether you’re building new or renovating an existing space, the big question is: Should you install in-slab heating or a system above the slab? This guide will help you decide based on your project type, flooring material, and how you plan to use the room.

What Is a Concrete Slab Floor?

A concrete slab is a flat, horizontal structural element commonly used as the foundation for basements, garages, ground floors, and home additions. These floors tend to stay colder than other parts of the house—especially during winter—making them perfect candidates for radiant floor heating systems.

How Will You Use the Room—and the Heat?

The biggest factor in choosing between in-slab and above-slab heating is how you plan to use the space and what kind of heating performance you expect:

  • Short, scheduled heat (e.g., mornings and evenings): Choose TempZone™ Cable or Mats

  • Continuous warmth all day or night: Choose in-slab heating Cable or Mat

  • Polished or stamped concrete surface: Choose in-slab heating

In-Slab Heating: Best for New Construction or Additions

If you’re pouring a new concrete slab—whether for an addition, garage, or new home—in-slab heating is the most effective option. This system is embedded directly into the concrete as it’s poured, providing gradual but long-lasting radiant warmth.

Product Options:

Wattage: 20 watts per square foot

Best For: Long-duration heating, new builds, and decorative concrete floors

Slab Heat Cable and Mat with Thermostat

Above-Slab Heating: Perfect for Renovations or Existing Homes

If your slab is already poured, an above-slab radiant system is your best bet. These systems are installed on top of the existing concrete, just below the final flooring layer.

TempZone™ Systems are perfect for:

Product Options:

  • TempZone™ Mats – Mesh-backed rolls with pre-spaced heating cables

  • TempZone™ Cable – A free-form option spaced at 3”, 4”, or 5”, depending on your heat needs and local climate conditions. Tighter spacing (3”) is recommended for colder regions where a faster and more intense heat output is required, while wider spacing (4”–5”) may be sufficient in milder climates.

Wattage: 15 watts per square foot

Best For: Quick warm-up, flexible schedules, retrofit applications


Note: For TempZone™ systems, always install a layer of ThermalSheet™ insulating underlayment to improve energy efficiency, heat distribution, and moisture resistance.

Side-by-Side Comparison Table

Feature

In-Slab Heating

Above-Slab Heating (TempZone™)

Installation Method

Embedded in freshly poured concrete

Installed on top of existing slab

Ideal Use Case

New builds, additions, polished/stamped concrete

Renovations, existing slab, tile/stone floors

Heat-Up Speed

Gradual, slow heat delivery

Quick response, fast warm-up

Daily Use Pattern

Best for long, continuous use (all-day warmth)

Ideal for scheduled heating (e.g., morning/evening)

Wattage per Square Foot

20 W/sq. ft.

15 W/sq. ft.

Product Formats

Slab Heat Mats and Cables

TempZone™ Mats and Cables

Flooring Compatibility

Concrete slab (no finish flooring needed)

Tile, stone (with TempZone™), laminate/carpet (use Environ™)

Recommended Underlayment

Not required

ThermalSheet™ recommended

Cost Consideration

Efficient for continuous, all-day heating—ideal for spaces that stay warm most of the time

Energy-saving option for scheduled use—best for rooms used during specific hours like mornings or evenings.

FAQs About Slab Heating and Radiant Floors

Wondering if slab heating is right for your project? Here are answers to common questions:

What is the best way to heat a concrete slab floor?

The most efficient method is to embed radiant heating cables or mats directly into the slab during the pour. This provides long-lasting, consistent warmth.

Can I install radiant heat over an existing concrete slab?

Yes. Above-slab systems like TempZone™ can be installed over existing concrete using underlayment and self-leveling cement, depending on your floor type.

How long does it take for a heated concrete slab to warm up?

In-slab systems take longer to warm up—typically several hours—due to the thermal mass of concrete. However, once warm, they hold heat efficiently.

Is radiant heating expensive to run?

Radiant heating can be very cost-effective, especially in well-insulated areas. In-slab systems are efficient for long-duration heating, while TempZone™ systems are ideal for scheduled or short-use heating.

Which Radiant Floor Heating System Is Right for You?

Still unsure? Here’s a quick guide:

  • Choose Slab Heating if you’re building new and want a seamless, built-in system that delivers consistent heat throughout the day.

  • Choose TempZone™ if you’re renovating or want a responsive system that works with your schedule and provides faster heat-up times.

Plan Your Heated Slab Project with Confidence

Whether you’re transforming a basement, garage, or the entire first floor, radiant heat is one of the most effective ways to eliminate cold spots and boost comfort. But choosing the right system—based on your slab type, flooring, and daily use—makes all the difference.

Need help deciding? Submit your floor plan to get a free SmartPlan™, which includes:

  • A custom layout for your project

  • A detailed electrical plan

  • A complete materials list

  • Expert recommendations based on your goals

Let us help you bring lasting warmth to your concrete slab—simply, efficiently, and with confidence.