Wi-Fi WeMo Light Switch
Towel Warmer Controls Description
If you’re looking for an easy way to add some convenience to your plug-in radiant heating product, look no further than the WeMo Light Switch. With this control, users can turn their heating devices on or off manually or by using a mobile device. (Note: Android devices must be running Android 4.0 or higher, and Apple devices must be running iOS 5 or higher in order to be compatible with the WeMo app.) The WeMo Light Switch uses a hardwired 120V electrical connection. Once you’ve registered with the WeMo app on your mobile device, you will be able to operate and even set schedules for the device while you’re away.
Wemo Light Switch dimensions are 4"x1.75"x2" (without face plate) 5"x3.5"x2" (with face plate)
|Maximum Current||15 A|
|Maximum Load (Resistive Only)||15Amps|
|Ground Fault Protection (GFCI)||No|
|Has Floor Sensor||n|
Documents & Manuals
- PLS750C Programmable Timer Quick Programming Guide (Legacy)
- T1033-A Timer Single Pole Programming Guide (Legacy)
- Wemo Light Switch Programming Guide
- PLS750C Programmable Timer Towel Warmer Wiring Diagram
- Wiring Diagram for Towel Warmers with Hardwired WeMo Wi-Fi Switch
Customer Questions & Answers
Can I install a Towel Warmer in my shower enclosure?
No, a Towel Warmer should never be installed in a shower enclosure, sauna, or steam room.
Heating product does not turn ON and Locator LED does not turn ON
- Circuit breaker or fuse has tripped
- Heating Circuit is open.
- Load neutral connection is not wired.
- Neutral (white wire) not wired to switch.
- Verify 120V supplied to the switch.
- Heating product has a bad connection.
- Wires not secured firmly to leads of timer switch.
Will the moisture in my bathroom cause the Towel Warmer's finish to rust or create a short?
No. The Towel Warmer is not only designed to keep your towels warm and dry but also to withstand the high moisture level in your bathroom.
What kind of power does the Towel Warmer require and will I need a separate power source?
WarmlyYours Towel Warmers require no more power than is generated from your standard 120V wall outlet. For hardwired Towel Warmers, all the wiring is done through the wall. A separate power source is not required; power can be pulled from the nearest available source. For plug-in towel warmers, all that is required for electric hookup is that the unit is plugged into a properly grounded outlet located within 6 feet (1.8m) of the unit.
What does the Towel Warmer include when I receive the package and do I need additional equipment?
The package includes all the hardware that you will need to install the Towel Warmer. All you will need to provide are the actual tools necessary to install such as a drill and screw driver.
How hot does the Towel Warmer actually get and is there any possibility of damage?
The Towel Warmer will heat up to between 100 and 140 degrees Fahrenheit. It will not produce sufficient heat to injure you if you touch or brush up against it, though you should still exercise caution around the device. Please note that once a towel warmer is warmed up, the surface temperature will remain constant and can't be adjusted incrementally.
The Towel Warmers have a built-in offset from the wall (the size of the offset will depend on which model you purchased); the offset provides sufficient clearance to prevent any damage to the wall. You should also maintain a distance of four inches between the Towel Warmer and surrounding fixtures.
Towel Warmer models from the Premier, Elevate or Cosmopolitan Collections come with built-in TempSmart™ overheat protection to prevent the unit’s surface temperature from exceeding 149°F (65°C). Models from the Classic Collection do not.