How to Test the AIR-SS-2 Aerial-Mounted Snow Sensor
Maximize Your Snow Melting System's Efficiency with a Properly Tested Aerial Sensor
Facing issues with your snow melting system not activating when it should? Unsure if your aerial sensor is functioning correctly? This video from WarmlyYours provides clear, step-by-step guidance on how to efficiently test your aerial sensor, ensuring your snow melting and deicing systems work optimally in snowy and icy conditions.
- Introduction to the aerial sensor's moisture and temperature sensing capabilities.
- Guidance on how to simulate wet and cold conditions for testing.
- Step-by-step instructions on using water and a can of compressed air to test the sensor.
- Confirmation signs that your aerial sensor is functioning correctly.
- How to reach out to us for further assistance or questions on Aerial-Mounted Sensor and Snow Melt Controls.
This video tutorial is a valuable resource for both homeowners and professionals wanting to ensure their snow melting and deicing systems function effectively and efficiently. Armed with this knowledge, you can confidently maintain your system for safe, reliable, and long-lasting operation.
Hello, I'm Scott from WarmlyYours, and today we're going to show you how to test your aerial sensor. We'll assume that you have this sensor hooked up to the system and that it is wired to your control. The last step is to test it to ensure that it activates the control properly. This sensor features a moisture sensor at the top and a temperature sensor at the base. It sends a signal back to the control when it detects moisture and when the temperature is below 38 degrees Fahrenheit outside. This is why your system does not activate during the summer months.
To test the sensor, we will use two items: water and a can of compressed air turned upside down. First, we will test the top of the sensor by applying water to it, which will complete the circuit and simulate wet conditions. Next, we need to trick the sensor into thinking that it is cold. To do this, locate the tab just above the label and rotate the sensor 180 degrees.
Now, take your can of compressed air and ensure it is upside down before spraying the base of the sensor for about 10 to 15 seconds. It is important that the can is full, as this will provide the necessary pressure. You can find compressed air at most stores that sell computers or keyboards, as it is commonly used for cleaning. After a few seconds of spraying, you should hear the control activate, confirming that the aerial sensor is functioning correctly.
If you have any further questions, please feel free to reach out to us anytime at www.warmlyyours.com. Thank you for watching!