As always extremely impressed with your product.
Item Reviewed:This was the only thing that made me a little unsure if all was well. I did my ohm readings and hooked up the circuit check, but because they seem so flimsy and me being new to the WarmlyYours I had to just trust that all was well. I did disconnect to hear the sound, but somehow it would be nice to have a more robust unit that I could purchase at the beginning of my installation projects (one time)that would put my unease to rest.
Item Reviewed:Arrived well package with clear instructions. Exactly as my layout was planned - to the inch. A very good experience
Item Reviewed:My customer rave about this system
Item Reviewed:This is at least the 4th heating unit I've installed. This one was set under Schluter Ditra. No problems. I do use 14G thhn wire to make a sceed in areas not covered by the heat mat so keeping the thinset level is easier.
Item Reviewed:I use the circuit check, but I also check frequently with a multimeter. My hearing is not that great, so I don't always hear it. A flashing light would be nice.
Item Reviewed:Very simple to install. Tech support is awesome. I would definitely buy from these guys again. Thanks, Frank
Item Reviewed:I had a little difficulty using it, but once I figured it out. It was a great tool to make sure my installation was fully functional before I set the tile....Great Product
Item Reviewed:Great product !! Easy to install, operates fantastically !
Item Reviewed:gives us piece of mind. great idea.
Item Reviewed:great system.
Item Reviewed:Believe it or not the mats are finally installed in the floor tile but are still to be energized. This project has gone on longer than anticipated but it has also expanded. I'm confident that your product will work as well as all of the other materials that I've gotten from you. If I have a problem I'll be sure to check with you but I'm sure it will be fine and give me years of comfort.
Item Reviewed:As always your response time and follow up along with quick shipping are commendable. Thanks to Dan R. for being so curtious. Thanks, Mark Edenburn
Item Reviewed:Installation was a little more difficult than anticipated, I thought that the panels would be precut. But the end result was fine, we like the floor and I will purchase another one for our second bathroom later this year.
Item Reviewed:This was installed & it has never worked. We took out the transformer & was told we needed to abandon the shower if it's not hooked up to the transformer as it was all wired together when the tile man covered the dam. There is no other way to make it work it seems - $1K down the drain. We are looking into going back to SunTouch or hydronic for the next big project with 7 bathrooms. Not good product advertising for the design trade if it's that difficult to fix. I've also used this product on two other jobs - one of which the electrician refused to place in the shower so there was additional mat left. The other one - we had to replace the control already.
Item Reviewed:I am giving a 5 star rating because the product is good and the overall documentation was good. The only thing I could not find was the factory resistance measurements. This is the second system I installed and it seemed to go quicker.
Item Reviewed:Circuit check worked fine. I found it reletively easy to hot glue the mat down as well as a few "free-form" areas. I buried the heat mat using one coat of mortar and "orange waffle" poly tile seperation mat (by others). The heat cable is pretty tuff so I thought it was pretty easy to cover with mortar w/o damaging it.
Item Reviewed:I installed this myself by carefully following the supplied instructions. I'd say my floor area shape was more complex than most but instructions were good & exact. I used the hot glue on my plywood subfloor. I buried the heat mat under one coat of mortar and the orange tile seperation poly mat (made by others). Then layed my floor tile over that the next day. Even though only half the floor is heated there are no cracks in any of the grout joints. Warmly was quick to answer any questions I had. Good Customer Svc. for sure.
Item Reviewed:wonderful product only problem is design you layed out for us leaves cold spots on the ceramic tile floor in the spots where there are no heating wires. Had this been accounted for at design time I would have asked for a design that had extra grid on all areasof the floor that are walked on.
We can easily help with that! Send us a plan with the right dimensions and we provide a custom installation plan for every job, at no cost. This plan will show your exact coverage to make sure you don't get cold spots.
This is the 4th bathroom I have installed WarmlyYours heated flooring in. In all cases the product has been great and we love it. Paul
Item Reviewed:The tempzone roll was easy to install and with the Ditra system combined, the installation was done in a single day. The problem I have is with the temperature control unit. It is hard to read and does not light up (background lit) when adjusting the time/zones or setting temperature. I find this to be a problem with my Age in Place customers who have difficulty seeing and pushing buttons (60+ years of age).
Item Reviewed:So awesome waking up in the morning during the winter months, heading into the bathroom and having a toasty warm tile floor. You product works wonderful. I can't say enough good about it.
Item Reviewed:circuit check made it real easy to ensure you didn't have problems with the wiring before you layed the tile ... and again after all remodeling was complete to make sure I didn't jiggle the wiring in the box.
Item Reviewed:The system was very easy to install and it works very well. The customer support was fantastic. My only challenge was during the install, I found it very had to build up a thick enough layer of thin set to cover the heating element, the next time I install a system, I will use the self leveling compound, even though it will be more work.
Item Reviewed:Once I learned that the batteries in the circuit checker had a very limited life I realized I should not have left it on during complete install. Better to just stop and test along the way. Got a false reading at end. I realize a better checker is avail but more money. Maybe bold print instructions about battery life or some such.
Item Reviewed: