WarmlyYours
WarmlyYours.com
P:+1 (800) 875-5285
Mon-Fri, 7:30am-5:30pm CST
info@warmlyyours.com
F: +1 (800) 408-1100

Heatlay Custom Mat Design Parameters

Share:


See below for design parameters for custom mats produced by Heatlaty for WarmlyYours.

New Design Parameters from 8/2/2017:

The new construction is essentially the current version with the tape being replaced by a layer of fabric, and the max length for a single mat going from 15’ to 20’.  

  • Design Parameters; Available voltages:  120V / 208V / 240V; 
  • Largest single mat: 6' wide x 20' long (120ft2); 
  • Minimum size: 8.0 ft2 for 120V, 12.0 ft2 for 208V, 16.0 ft2 for 240V; 
  • Output: Design Range 12 - 15 W/ft2; 
  • Cold lead may exit at any point along mat perimeter; 
  • Cold leads custom sized at 10' or 15' or in 1' increments beyond 15'; 
  • 25' maximum lead length. 
  • Wire will be 1” - 1.25” from the fabric edge.


Previous Design Parameters before 8/2/2017:

Metallica tape holding the wires on the fabric mesh.

  • Minimum square footage available: 
  • 120V - 7.5' - 8'
  • 240V - 15' - 16'
  • Maximum cold lead length:  25' (That's all the length that they are approved for by ETL)
  • Widest mat available:  5' - 6'
  • Distance from walls:  2"


Custom Mat Specs for Designed Jobs are attached.

Written by Scott Rosenbaum
Posted on
Subscribe for Updates