Relay with built-in transformer 240V+Floor Sensor
Floor Heating Home Automation Integration Kits Description
WarmlyYours electric floor heating systems can easily be integrated with your home automation system or third-party thermostat. The 240 V Integration Kit+ includes all the features of the 240 V Integration Kit, plus a 10 kilohm floor temperature sensor to give you even better control of your TempZone™ or Environ™ radiant heating system. The 240 V Integration Kit+ includes an electric heating relay with a built-in 24V/1.2VA/Class 2 transformer. This integration kit includes 3-wire, double-pole switching and a 12 AWG terminal wire, and operates at a resistive load of 22 amps at 240 V. The kit features a terminal board connection to make the installation process easy. Epoxy soundproofing ensures quiet operation of the relay, and a quick glance at the heating command indicator light confirms relay operation. Because of the low current consumption of the relay, a single thermostat can control multiple relays. The Integration Kit+ is C-UL-US Listed for safety and comes with a 3-year warranty against manufacturer defects.
Specifications
Electrical
Connection | Single pole, 3 wires |
Connection Method | Hardwired |
Maximum Load (Resistive Only) | 22 amps |
Sensor Type (Resistance) | 10 kOhm |
Transformer Ratings | 24 VAC / 1.2 VA / Class 2 |
Voltage | 240 V |
Controls
Control Signal | 24VAC / 40mA / 1.2VA |
Logistics
Country of Origin (COO) | China |
Identifiers
Ground Fault Protection (GFCI) | No |
SKU | INTEGRATION-KIT-PLUS-240V |
UPC (GTIN-12) | 881308037918 |
Product Dimensions
Length | 15′ |
Width | 0.1″ |
Warranty / Certifications
Warranty | 3 years |
Documents & Manuals
Installation
- TH115-AF-GA-08 SmartStat Installation Manual (English)
- RC840 Installation Guide (English)
- RC840T (Integration Kit) Installation Guide (English)
Project Planners
Wiring Diagrams
- Generic Wiring Diagram & Instruction, Integration Kit (English)
- Generic Wiring Diagram Multiple Integration Kits 240V (English)
- Nest Integration Multi 240V Wiring Diagram and Instructions (English)
- Nest Integration Wiring Diagram and Instructions (English)
- Savant Integration Wiring Diagram and Instructions (English)
- TempZone™ Custom & Standard Mat Wiring Diagram (English)
- WIRING DIAGRAM 120V & 240V Heating Products with PB112D-GA (English)
- Wiring Diagram for Multiple Twin Floor Heaters with nSpire Series Thermostat Using a Junction Box (English)
- Wiring Diagram for TempZone™ Cut & Turn Single Conductor (Multiple rolls) 120V & 240V with SmartStat™, EasyStat™ and Comfort Regulator (English)
- Wiring Diagram for TempZone™ Cut & Turn Twin Conductor (Multiple Rolls) 120V & 240V with SmartStat™, EasyStat™, Comfort Regulator and Power Modules (English)
Sell Sheets
Customer Questions & Answers
Floor Heating Home Automation Integration Kits has 28 Questions and Answers.
How do I work with my electrician to install WarmlyYours electric floor heating?
While WarmlyYours electric radiant floor heating systems are typically installed by your floor covering contractor, a licensed electrician is recommended for the final thermostat hook-up. With every quote, we provide an Installation Plan layout, together with an electrical plan that has all the info required for the electrician.
What type of flooring can I install along with an electric floor heating system?
WarmlyYours’ TempZone™ product is most commonly installed under tile, stone, and marble flooring, but can also be installed under many other popular floor covering options such as hardwood, vinyl and linoleum. We also have our Environ system, which is an electric floor heating product as well and is specially designed for installation under carpet (in the U.S. only), laminate and floating wood. WarmlyYours can accommodate any flooring type with either of the electric radiant floor heating products that we offer. If your flooring type isn't listed here, just give us a call at (800) 875-5285 and we will be happy to discuss it with you.
How do I know if I am installing my electric floor heating system properly?
Please keep in mind that you must check your electric floor heating system with a digital ohmmeter in conjunction with a Circuit Check™. Take an initial reading as soon as you take the product out of the box to verify that it is within -5% / +10% of the values stated on the product’s label. This will give you a basis of comparison for future readings. Take a second reading once you have positioned the system to match your custom installation plan. It is also advisable to take an additional reading in the middle of the tile installation, just to make sure that the Circuit Check™ is doing its job. Then, take a final reading when you are finished with the floor installation and are ready to hook up the thermostat.
The Circuit Check™ is a tool developed by WarmlyYours to give you peace of mind and ensure trouble-free installations. Simply hook up the cold leads to the tool while you position the system to match your custom installation plan.
The Circuit Check™ will continuously monitor the continuity of the circuit during the installation of your system and during the installation of your flooring. The Circuit Check™ beeps immediately when a short in the system is detected, alerting you to a potentially damaged cable in the area you are working, before you lay the tile over the electric floor heating system. The WarmlyYours technical support team is available 24/7 to provide assistance if the alarm sounds, or if you would have any questions during your installation.
Can I use electric floor heating as a primary heat source?
Yes, in most cases, an electric floor heating system can be effective as a primary heat source. However, our TempZone™ and Environ™ systems are most commonly used as a secondary heat source, providing floor-to-ceiling radiant heat to any room in your home where you desire more warmth and comfort.
If you are considering electric floor heating for an addition to your home, such as a sunroom where you have no other source of heat, WarmlyYours offers an innovative online tool which calculates approximate heat loss. This tool can help you to determine if a WarmlyYours’ electric radiant floor heating system will provide your desired comfort temperature throughout the year. You can access the Heat Loss Calculator or you can call us at (800) 875-5285 and a Customer Service Representative will make the calculation for you.
How much does it cost to run an electric floor heating system?
The answer to this question will depend on a whole host of variables related to electric floor heating, including, but not limited to, the run time (for supplemental heating, we usually recommend between 4-8 hours per day), the electric radiant floor heating system you're using, the total square footage, and your local electrical cost. Typically, the cost is just a few cents a day.
To figure out how much electric floor heating might cost to run for you, make sure to use our interactive Operating Cost Calculator.
View all 28 Questions and Answers
Customer Reviews
Floor Heating Home Automation Integration Kits achieved an average rating of 4.9 stars with 33 reviews by our customers.
Warmly staff was very helpful in selecting the correct items
David D., Vashon, WA on 08/11/2023
Warmly staff was very helpful in selecting the correct items to purchase for my project. The instruction booklets were very clear and made installation straight forward. Everything worked without any issues. Thanks
Great service
Nick P., Richmond Hill, ON on 05/28/2023
Great product and easy to install.
Cozy Toes!
Anonymous, Albuquerque, NM on 03/06/2023
I enjoy heated floors so much. This is perfect in my small bathroom. Makes for warm feet in the middle of the night, early morning.
I hate my heated floor - Said nobody ever!
Kory N., Portland, OR on 02/19/2023
Customer is super happy with it and the install went flawlessly. Great coverage and no cold spots. With the curb less shower pan the floor is warm everywhere. :)
Great product, great customer service
Caroline Y., Gloucester, ON on 02/14/2023
The team at WarmlyYours is amazing. They are responsive, helpful and professional. The engineered plans are very useful as well and the prices reasonable. We would definitely use them for our next heated floor project.
Great Customer Service
Allen B., Brighton, MI on 01/30/2023
Ordered a new thermostat cable for my new mat. Service was great and the shipping was very quick.
Easy, Peasy
Krista F., Naperville, IL on 01/16/2023
Working with the WarmlyYours products and staff could not be easier! Products are perfect for the new construction projects.
Kerilyn Merritt ROCKS!
John P., Westerly, RI on 12/27/2022
I’m not a big account but Kerilyn treats as if I am. IMO she is a huge asset to the company. All my business with them has been exemplary and will always use them for all my projects!
Works Great
James S., Gloucester, MA on 11/21/2022
As part of meeting our goal for all electric heat, we found after installing heat pump splits in adjoining rooms, that we still had to kick in the gas heat to bump the kitchen warm enough. Installing WarmlyYours heating elements under a new floor surface did the trick nicely.
Best customer service ever!
Edward T., Spokane, WA on 10/24/2022
To my knowledge this is my first ever review - but WarmlyYours (WY) earned it! My wife and I (66 and 67 years ago) recently (couple months ago) completed our installation of the 847 feet 240 volt floor heating cable (Temp Zone Floor Heating Cable) for a new sunroom we had recently added (About 17' by 17'). We used the Prodeso matt under the cable and we installed 18 by 18 ceramic tiles as the flooring surface. We also purchase the n-spire programable thermostat. Our contact person at WY was Jennifer Stasica (Melus) and she was phenomenal. We went thru several (actually many) design and product options before settling in on the ceramic tile as our flooring option. I had a little trouble getting the thermostat connected but the WY tech team was Johnny on the spot and quickly helped me get the thermo connected. For full disclosure my wife and I are both pretty handy - but the instruction from start (checking cable) – to finish (connecting thermos) are spot on and easy to follow. I also took the time to contact Custom Building Products tech support for their recommendation on the bonding primer (we put down on plywood floor) and best thin sent to use in this application (bonding primer MBP and thin set ProLite Premium Large Format). We used the two-step method for installation, i.e Thinset the Prodeso, lay the cable according to the WY supplied plan, then set wire into Predeso and an finally title onto the covered Prodeso/heating cable. I will not hesitate in using WY for any future heating projects but I am thankful this large project is completed. For a bathroom etc. putting down Temp Zone cable would be an easy project. Thank you again Jennifer - and pass on my thanks to your engineering team for the many renditions we worked thru. PS another reason I waited to do this review was to see how the heated floor performed. No really cold days yet - but on the cooler evenings it is meeting my expectations.