Relay with built-in transformer 120V
Floor Heating Home Automation Integration Kits Description
The WarmlyYours 120 VAC Integration Kit connects your radiant floor heating system to third-party controls, giving you the ability to control your TempZone™ or Environ™ systems with the stand-alone thermostat or home automation system of your choice. The 120 VAC Integration Kit features an electric heating relay that operates at a resistive load of 22 amps at 120 VAC and includes a built-in 24V/1.2VA/Class 2 transformer. The epoxy-soundproofed relay ensures quiet operation and low current consumption. This 120 VAC Integration Kit features 3-wire, single-pole switching and a 12 AWG terminal wire. It includes a heating command indicator light to provide at-a-glance verification of relay operation and a terminal board connection to facilitate easy installation. The Integration Kit is C-UL-US Listed and carries a 3-year warranty against manufacturer defects.
|Connection||Single pole, 3 wires|
|Maximum Load (Resistive Only)||22 amps|
|Transformer Ratings||24 VAC / 1.2 VA / Class 2|
|Control Signal||24VAC / 40mA / 1.2VA|
|Country of Origin (COO)||China|
|Ground Fault Protection (GFCI)||No|
Warranty / Certifications
Documents & Manuals
- Generic Wiring Diagram & Instruction, Integration Kit (English)
- Nest Integration Wiring Diagram and Instructions (English)
- Savant Integration Wiring Diagram and Instructions (English)
Customer Questions & Answers
Floor Heating Home Automation Integration Kits has 28 Questions and Answers.
While WarmlyYours electric radiant floor heating systems are typically installed by your floor covering contractor, a licensed electrician is recommended for the final thermostat hook-up. With every quote, we provide an Installation Plan layout, together with an electrical plan that has all the info required for the electrician.
WarmlyYours’ TempZone™ product is most commonly installed under tile, stone, and marble flooring, but can also be installed under many other popular floor covering options such as hardwood, vinyl and linoleum. We also have our Environ system, which is an electric floor heating product as well and is specially designed for installation under carpet (in the U.S. only), laminate and floating wood. WarmlyYours can accommodate any flooring type with either of the electric radiant floor heating products that we offer. If your flooring type isn't listed here, just give us a call at (800) 875-5285 and we will be happy to discuss it with you.
Please keep in mind that you must check your electric floor heating system with a digital ohmmeter in conjunction with a Circuit Check™. Take an initial reading as soon as you take the product out of the box to verify that it is within -5% / +10% of the values stated on the product’s label. This will give you a basis of comparison for future readings. Take a second reading once you have positioned the system to match your custom installation plan. It is also advisable to take an additional reading in the middle of the tile installation, just to make sure that the Circuit Check™ is doing its job. Then, take a final reading when you are finished with the floor installation and are ready to hook up the thermostat.
The Circuit Check™ is a tool developed by WarmlyYours to give you peace of mind and ensure trouble-free installations. Simply hook up the cold leads to the tool while you position the system to match your custom installation plan.
The Circuit Check™ will continuously monitor the continuity of the circuit during the installation of your system and during the installation of your flooring. The Circuit Check™ beeps immediately when a short in the system is detected, alerting you to a potentially damaged cable in the area you are working, before you lay the tile over the electric floor heating system. The WarmlyYours technical support team is available 24/7 to provide assistance if the alarm sounds, or if you would have any questions during your installation.
Yes, in most cases, an electric floor heating system can be effective as a primary heat source. However, our TempZone™ and Environ™ systems are most commonly used as a secondary heat source, providing floor-to-ceiling radiant heat to any room in your home where you desire more warmth and comfort.
If you are considering electric floor heating for an addition to your home, such as a sunroom where you have no other source of heat, WarmlyYours offers an innovative online tool which calculates approximate heat loss. This tool can help you to determine if a WarmlyYours’ electric radiant floor heating system will provide your desired comfort temperature throughout the year. You can access the Heat Loss Calculator or you can call us at (800) 875-5285 and a Customer Service Representative will make the calculation for you.
Yes, the drying effects of electric radiant floor heating will reduce the humidity coming from the slab, which is the largest source of moisture.
View all 28 Questions and Answers
Floor Heating Home Automation Integration Kits achieved an average rating of 5.0 stars with 1 reviews by our customers.
Great product and excellent customer services!
Ninfa L., Hewlett, NY on 04/26/2021
I enjoy dealing with Mary who helped me to choose the right product for the project I engaged her on. Excellent customer service and she went the extra mile to ensure I got all of what I needed to complete the project. Product perfect for my needs...