Contact Us After Hours

Loading contact options...

Sign In

Loading...

MR-4824D-AUD Frequently Asked Questions

Don't see the answer you're looking for? Post your question

Frequently Asked Questions

Showing 10 of 13 questions

Color Rendering Index (CRI) is a measure of a light source's ability to faithfully reveal the colors of an object or surface in comparison with an ideal or natural light source. This rating is measured on a scale of 0 to 100. The CRI for WarmlyYours LED mirrors is 90+, making for very accurate lighting.

6 people found this helpful Was this helpful? Yes No

The voltage for all models is 120 Volts.

6 people found this helpful Was this helpful? Yes No

Yes. Anytime that the power source is interrupted, the light will need to be activated again with the touch-activated on/off button on the mirror's surface. 

6 people found this helpful Was this helpful? Yes No

The expected LED lifetime is about 50,000 hours.

5 people found this helpful Was this helpful? Yes No

This will vary from mirror to mirror. There are 500-600 lumens per linear foot of LED strip, shorter strips yield less lumens. Different mirrors have different lengths of LED strips. These units have 2400-3600 lumens. In general, mirrors with lights facing towards the user can provide sufficient lighting. While mirrors with light around the edges should be considered accent lighting.

4 people found this helpful Was this helpful? Yes No

All of our LED mirrors can be controlled by a light switch. Mirrors from the Marquee Series come with a touch on/off button on the face of the glass so the light switch will have to be on before pressing the button on the mirror. Once on, the mirror can be turned off with the wall switch but the process outlined previously will need to be repeated to turn the mirror back on. 

2 people found this helpful Was this helpful? Yes No

The LEDs are rated at 80 thousand hours. The driver/transformer is easily replaced if it ever does fail, so the whole mirror does not need to be replaced. There should little to no concern about the lighting strips failing on this product.

2 people found this helpful Was this helpful? Yes No

Our lighted mirrors are hardwired. The electrical gang box should be installed according to the location of the unit’s electrical connection box located on the back.

1 person found this helpful Was this helpful? Yes No

No, the LED mirror models cannot be mounted on an existing cabinet and should only be mounted on a wall.

1 person found this helpful Was this helpful? Yes No

In theory, defoggers can be mounted to the mirrors. We do not sell any defoggers that will fit any of the mirrors.

Here are the available area dimensions for each unit:

Audrey and Ingrid: 8"x12"

Marilyn: 10"x4"

Judy: 15"x15"

Was this helpful? Yes No

For a streak-free shine, use a soft microfiber cloth with ethyl alcohol or a dedicated glass cleaner. Avoid hard paper towels and mineral water, as they can scratch the surface or encourage rust. If you ever need to move the mirror for deep cleaning, always lay it flat on a soft cushion. Protecting those fragile corners is the secret to a long-lasting mirror.

Was this helpful? Yes No

Absolutely. These mirrors are crafted from high-quality float glass with copper-free silver layers for a crystal-clear 95%+ reflection. We also apply five layers of Valspar™ anti-oxidation coating to ensure a long, rust-free life. Even in the steamiest bathroom environments, this mirror is built to stay pristine.

Was this helpful? Yes No

Blinking usually indicates the built-in heat protection logic has been triggered to prevent damage. Check for any leftover plastic films, stickers, or dust that might be trapping heat against the mirror. If it’s been running for weeks in a hot room, simply turn it off for about 45 minutes. Once it cools down, it should return to normal operation.

Was this helpful? Yes No