Relay with built-in transformer 120V
Features
-
Connects floor heating to smart systems
-
Built-in transformer for voltage compatibility
-
Available with or without floor sensor
-
Supports 120V and 240V systems
-
Ensures precise temperature control
Floor Heating Home Automation Integration Kits Description
The WarmlyYours 120 V Integration Kit connects your radiant floor heating system to third-party controls, giving you the ability to control your TempZone™ or Environ™ systems with the stand-alone thermostat or home automation system of your choice. The 120 V Integration Kit features an electric heating relay that operates at a resistive load of 22 amps at 120 V and includes a built-in 24V/1.2VA/Class 2 transformer. The epoxy-soundproofed relay ensures quiet operation and low current consumption. This 120 V Integration Kit features 3-wire, single-pole switching and a 12 AWG terminal wire. It includes a heating command indicator light to provide at-a-glance verification of relay operation and a terminal board connection to facilitate easy installation. The Integration Kit is C-UL-US Listed and carries a 3-year warranty against manufacturer defects.
Specifications
Electrical
| Connection | Single pole, 3 wires |
| Connection Method | Hardwired |
| Maximum Load (Resistive Only) | 22 amps |
| Transformer Ratings | 24 VAC / 1.2 VA / Class 2 |
| Voltage | 120 V |
Controls
| Control Signal | 24VAC / 40mA / 1.2VA |
Identifiers
| Ground Fault Protection (GFCI) | No |
| SKU | INTEGRATION-KIT-120V |
| UPC (GTIN-12) | 881308030216 |
Product Dimensions
| Length | 0.1″ |
| Weight | 0.8 lbs |
| Width | 0.1″ |
Warranty / Certifications
| Warranty | 3 years |
See This Product in Action
Documents
Installation
Technical Information
Wiring Diagrams
- Generic Wiring Diagram & Instruction, Integration Kit (English)
- Nest Integration Wiring Diagram and Instructions (English)
- Savant Integration Wiring Diagram and Instructions (English)
Sell Sheets
Frequently Asked Questions
Showing all 5 questions
Most low voltage HVAC thermostats are OK to use with tile floors. If you are heating wood, vinyl, carpet, or any other flooring products that have a "maximum temperature" limit, then low voltage HVAC thermostats are not recommended UNLESS they have an input for a floor sensor. Check with the low voltage HVAC thermostat manufacturer about floor sensor inputs first, before buying a third-party integration kit for these types of flooring products.
nJoin unit is designed to work with nSpire series thermostats. If you would like to use third-party thermostat or controller, we recommend using our Integration kits that will receive “call for heat” and activate the floor heating.
If multiple Integration Kits are needed, we suggest using 240V Integration Kits and 240V heating elements. See our support area for the appropriate diagram.
WarmlyYours suggests contacting the manufacturer of the home automation system to determine compatibility or how it recommends operating an electric floor heating system.
If the smart thermostat cannot process a floor sensor reading, it is not compatible and the integration kit will not resolve this.
