Countertop Heaters
FeelsWarm® Countertop Heaters adhere under granite, marble, quartz, and stone—raising surface temp 20-25°F. Ultra-slim, virtually invisible radiant heat for bars, islands, and kitchens.
Why Install a Countertop Heater?
Cold stone countertops are a luxury material with an uninviting surface. FeelsWarm® changes that—making your kitchen island or bar the warmest spot in the house.
Warm to the Touch
Raises stone surface temperature 20-25°F above room temp—no more cold granite on your wrists while you cook.
Ultra-Slim Profile
Less than 0.025" thick—thinner than a stack of 9 sheets of paper. Invisible once installed.
Low Operating Cost
Runs continuously for about 10¢ per day. Plug into any standard 120V household outlet—no electrician needed.
Low Voltage & Safe
Operates at just 12-24V for safe use in kitchen environments around water and food prep.
Easy to Install
Stick-on installation under existing countertops—no special tools, no contractor, no countertop removal.
3 Year Warranty
3-year warranty on heating elements, 2-year warranty on controls. Backed by 25+ years of radiant heating expertise.
Electric Kitchen Countertop Heating Solutions
WarmlyYours FeelsWarm® Countertop Heaters can be installed on new or existing stone countertops—perfect for overhangs on kitchen islands and peninsulas, bars, and even desks. Available in four popular sizes, they conveniently add luxurious radiant heat where you need it most.
Shop Countertop Heaters »*FeelsWarm® technology is a registered trademark of Heated Stone Products, patent pending.
Specifications
- Available in four popular sizes to fit your needs
- Mat Thickness 0.025 Inches upon installation
- Location of the standard heater tail is predetermined and not adjustable
Shop Countertop Heaters
-
Plug into a regular 120V outlet
-
Ultra-slim profile: less than 0.025", thinner than 9 sheets of paper
-
3 years for heating element, 2 years for controls/accessories
-
Increases the surface temperature by up to 25°F
-
Commonly installed underneath granite and stone countertops
-
Plug into a regular 120V outlet
-
Ultra-slim profile: less than 0.025", thinner than 9 sheets of paper
-
3 years for heating element, 2 years for controls/accessories
-
Increases the surface temperature by up to 25°F
-
Commonly installed underneath granite and stone countertops
-
Plug into a regular 120V outlet
-
Ultra-slim profile: less than 0.025", thinner than 9 sheets of paper
-
3 years for heating element, 2 years for controls/accessories
-
Increases the surface temperature by up to 25°F
-
Commonly installed underneath granite and stone countertops
-
Plug into a regular 120V outlet
-
Ultra-slim profile: less than 0.025", thinner than 9 sheets of paper
-
3 years for heating element, 2 years for controls/accessories
-
Increases the surface temperature by up to 25°F
-
Commonly installed underneath granite and stone countertops
How FeelsWarm® Works
FeelsWarm® uses ultra-thin resistive heating elements that adhere directly to the underside of your stone countertop. Power flows through the mat and gently warms the stone from below—no hot spots, no visible hardware, no noise.
Available in four popular sizes to cover islands, peninsulas, bars, and desks. Installs in minutes with no special tools.
Blog Posts
-
4 min
WarmlyYours
Aug 21, 2019
Frequently Asked Questions
Showing all 6 questions
Yes, but make sure you provide the details about the layer of particle board or plywood when the order is placed to ensure proper performance. It is pretty common to have particle board/plywood underneath stone as a support. Please note that the included surface prep kit should be used on the wood before adhering the heater.
Yes, but accommodation for the tail location (a 2“x2“ bump) must be made in the wood. Countertop heaters can go between the wood, corbels, support beams, etc., but the tail location must not get compressed between the stone and the supporting wood.