Lead Wire Twin 120V, 14 AWG, 1′
Notices
Quebec Repairability Notice
Avis important pour les consommateurs du Québec:
WarmlyYours n’offre pas de services de réparation pour ce produit. Les seules pièces de rechange disponibles sont les kits de raccordement (splice kits) ; l’élément chauffant lui-même n’est pas offert comme pièce de rechange. Si votre système de chauffage par le sol intérieur tombe en panne pendant la période de garantie, nous remplacerons l’unité complète conformément à notre politique de garantie. Notre équipe d’assistance technique est disponible 24h/24 et 7j/7 par téléphone pour toute aide à l’installation ou au dépannage. Pour plus de détails, consultez notre politique de retour. Cet avis est fourni conformément à la Loi sur la protection du consommateur du Québec, article 39 (telle qu’amendée en 2025).
Important Notice for Québec Consumers:
WarmlyYours does not provide repair services for this product. The only replacement parts available are splice kits; the heating element itself is not available as a replacement part. If your indoor floor heating system fails within the warranty period, we will replace the entire unit according to our warranty policy. Our technical support team is available 24/7 by phone for installation and troubleshooting assistance. For full details, see our Return Policy. This notice is provided in accordance with Québec’s Consumer Protection Act, section 39 (as amended in 2025).
Description
WarmlyYours cold lead allows you to extend the amount ofspace between your floor-heating system and your thermostat, when needed. Thiscold lead is compatible with our 120 V twin-conductor TempZone™ floor-heatingsystems rated over 9 amps with yellow, black and green coldleads. When the length of the factory-provided cold lead isn’t enough,purchasing our cold lead by the foot will give you the flexibility you need tocomplete your project.
*Compatible with 120 V TempZone™ Twin Flex Rolls and Cable.
Specifications
Cabling Specs
| Ideal Cable Spacing | 3″ |
Product Dimensions
| Length | 0.1″ |
| Weight | 0.0013 lbs |
| Width | 0.1″ |
Identifiers
| SKU | CL-TWIN-120-14 |
| UPC (GTIN-12) | 881308021269 |
Electrical
| Voltage | 120 V |
| Wire Gauge | 14 AWG |
Documents
Technical Information
Frequently Asked Questions
Showing all 1 questions
Please keep in mind that you must check your electric floor heating system with a digital ohmmeter in conjunction with a Circuit Check™. Take an initial reading as soon as you take the product out of the box to verify that it is within -5% / +10% of the values stated on the product’s label. This will give you a basis of comparison for future readings. Take a second reading once you have positioned the system to match your custom installation plan. It is also advisable to take an additional reading in the middle of the tile installation, just to make sure that the Circuit Check™ is doing its job. Then, take a final reading when you are finished with the floor installation and are ready to hook up the thermostat.
The Circuit Check™ is a tool developed by WarmlyYours to give you peace of mind and ensure trouble-free installations. Simply hook up the cold leads to the tool while you position the system to match your custom installation plan.
The Circuit Check™ will continuously monitor the continuity of the circuit during the installation of your system and during the installation of your flooring. The Circuit Check™ beeps immediately when a short in the system is detected, alerting you to a potentially damaged cable in the area you are working, before you lay the tile over the electric floor heating system. The WarmlyYours technical support team is available 24/7 to provide assistance if the alarm sounds, or if you would have any questions during your installation.
