Lead Wire Twin 120V, 14 AWG, 1′
WarmlyYours cold lead allows you to extend the amount of space between your floor-heating system and your thermostat, when needed. This cold lead is compatible with our 120 VAC twin-conductor TempZone™ floor-heating systems rated over 9 amps with yellow, black and green cold leads. When the length of the factory-provided cold lead isn’t enough, purchasing our cold lead by the foot will give you the flexibility you need to complete your project.
*Compatible with 120 VAC TempZone™ Twin Flex Rolls and Cable.
|Country of Origin (COO)||India|
|Ideal Cable Spacing||3″|
Customer Questions & Answers
Installation and Repair Parts has 21 Questions and Answers.
While WarmlyYours electric radiant floor heating systems are typically installed by your floor covering contractor, a licensed electrician is recommended for the final thermostat hook-up. With every quote, we provide an Installation Plan layout, together with an electrical plan that has all the info required for the electrician.
WarmlyYours’ TempZone™ product is most commonly installed under tile, stone, and marble flooring, but can also be installed under many other popular floor covering options such as hardwood, vinyl and linoleum. We also have our Environ system, which is an electric floor heating product as well and is specially designed for installation under carpet (in the U.S. only), laminate and floating wood. WarmlyYours can accommodate any flooring type with either of the electric radiant floor heating products that we offer. If your flooring type isn't listed here, just give us a call at (800) 875-5285 and we will be happy to discuss it with you.
How can I determine what I need for my floor heating project and how can I find out what my floor heating system will cost?
You can use the Instant Quote Tool, which gives you many options for your floor heating coverage. Use this interactive tool to design your room online and receive an instant quotation with product recommendations, rough-in and installation kits, cost of your control, etc. Planning your floor heating project is made easy when using our Instant Quote Tool.
Send us your floor plan or fax it to (800) 408-1100 and we will send you a quote, product recommendation and a free custom installation plan for your project.
Yes. Unlike the heating cable for electric floor heating, the cold lead wires can be trimmed.
Please keep in mind that you must check your electric floor heating system with a digital ohmmeter in conjunction with a Circuit Check™. Take an initial reading as soon as you take the product out of the box to verify that it is within -5% / +10% of the values stated on the product’s label. This will give you a basis of comparison for future readings. Take a second reading once you have positioned the system to match your custom installation plan. It is also advisable to take an additional reading in the middle of the tile installation, just to make sure that the Circuit Check™ is doing its job. Then, take a final reading when you are finished with the floor installation and are ready to hook up the thermostat.
The Circuit Check™ is a tool developed by WarmlyYours to give you peace of mind and ensure trouble-free installations. Simply hook up the cold leads to the tool while you position the system to match your custom installation plan.
The Circuit Check™ will continuously monitor the continuity of the circuit during the installation of your system and during the installation of your flooring. The Circuit Check™ beeps immediately when a short in the system is detected, alerting you to a potentially damaged cable in the area you are working, before you lay the tile over the electric floor heating system. The WarmlyYours technical support team is available 24/7 to provide assistance if the alarm sounds, or if you would have any questions during your installation.
View all 21 Questions and Answers
Installation and Repair Parts achieved an average rating of 5.0 stars with 3 reviews by our customers.
Would never consider any other product for floor heating
Dave S., La Crosse, WI on 03/21/2012
Easy do it yourself product. Simply, carefully follow the instructions. Would never consider any other product for floor heating. It is installed and running as advertised.
Very nice company
Terrence G., Seaside Park, NJ on 04/12/2011
Although I experienced some significant installation problems (my own errors) the product works very nicely when in use. As a rookie, I would never try to put down the tile directly over the mesh. Its just too easy and more protecitve to put down a lite skim coat first. I have a friend looking at your product now and will advise him to do what I didn't do. Your are a very nice company to work with- customer service and quality still yields big dividends. Thanks Terry Garrity
Rick D., Anchorage, AK on 01/20/2011
It all worked well. Most importantly, the efforts of your staff to help solve the problem were most appreciated. Knowledgable staff/salesmen (not order takers) are where it's at...