Marquee LED Mirrors Frequently Asked Questions
Frequently Asked Questions
Showing 10 of 12 questions
Color Rendering Index (CRI) is a measure of a light source's ability to faithfully reveal the colors of an object or surface in comparison with an ideal or natural light source. This rating is measured on a scale of 0 to 100. The CRI for WarmlyYours LED mirrors is 90+, making for very accurate lighting.
The voltage for all models is 120 Volts.
Yes. Anytime that the power source is interrupted, the light will need to be activated again with the touch-activated on/off button on the mirror's surface.
Light output varies by model. Check the lumen rating in the exact model’s specifications and consider it alongside the other lighting in your bathroom. Additional task lighting may be useful for makeup or shaving.
The expected LED lifetime is about 50,000 hours.
Frameless Marquee mirrors can use a wall switch to control power. The wall switch must be on before you press the mirror’s touch button. After switching power off at the wall, switch it back on and press the mirror’s touch button again to turn on the light.
The Marquee Series LED Mirrors are switchable and can be installed either vertically or horizontally. Judy model can be mounted horizontal only.
Our lighted mirrors are hardwired. The electrical gang box should be installed according to the location of the unit’s electrical connection box located on the back.
No, the LED mirror models cannot be mounted on an existing cabinet and should only be mounted on a wall.
Absolutely. These mirrors are crafted from high-quality float glass with copper-free silver layers for a crystal-clear 95%+ reflection. We also apply five layers of Valspar™ anti-oxidation coating to ensure a long, rust-free life. Even in the steamiest bathroom environments, this mirror is built to stay pristine.
Blinking usually indicates the built-in heat protection logic has been triggered to prevent damage. Check for any leftover plastic films, stickers, or dust that might be trapping heat against the mirror. If it’s been running for weeks in a hot room, simply turn it off for about 45 minutes. Once it cools down, it should return to normal operation.
Our products are easy to maintain. Simply use NON-AMMONIA glass cleaners to prevent rust and corrosion on the mirror. Prevent large moisture buildups on your mirror or else rusting and oxidization will happen.