Pro GEN II Grate Cover, Pro Series Brick Pattern, Brushed Nickel Finish


Pro GEN II Grate Cover, Pro Series Brick Pattern, Brushed Nickel Finish

C$17.50 C$35.00
50% Off!

Support Page

Description

This 3.75” x 3.75” Pro Series drain grate cover comes with a brushed nickel finish and brick pattern design. It’s compatible with the Pro GEN II Drain Assembly and it will friction fit within the drain riser. This screw-less installation method and included puller key means that the Pro GEN II’s integrated hair trap can be easily accessed and cleaned.

Specifications

Construction

Grate Cover Steel Type Stainless Steel

Product Dimensions

Grate Size 3.75” x 3.75”

Identifiers

SKU SH-271339
UPC (GTIN-12) 857937008094

Customer Questions & Answers

Shower Kits has 14 Questions and Answers.

Don't see the answer you're looking for? Post your question

Why is modified thinset better for my installation?

Modified thinsets are stronger once cured. Most have additional anti-crack features, and better initial tack/grab (AKA less “slump”). They also are required for use with porcelain and glass tile.

6 people found this helpful.  Did you find this helpful? Yes No

Should I install a traditional mud kit (drypack mortar and PVC liner / mortar and membrane) or use a pre-formed foam pan?

Pre-formed pans are easily modifiable and easy to install on any substrate. They are great for DIY, as well as for a fast and clean installation by a professional. Drypack kits do not work well for tiles smaller than 2" x 2" without additional work.

5 people found this helpful.  Did you find this helpful? Yes No

What is the typical operating cost of a TempZone Shower floor heating system?

The actual cost of operating your floor heating system will vary depending upon a number of factors including the cost of electricity in your area and the length of time you run your system. The WarmlyYours TempZone™ Shower Floor Heating Mat, for example, uses 15 watts per square foot. Based on a national average electricity rate of $.10/kW/hr, the approximate operating cost of an average bathroom using this system, measuring 4' x 4' would be as little as 4 cents a day. This cost is based on running your system a full 8 hours per day. Try our Operating Cost Calculator for a quick estimate.

4 people found this helpful.  Did you find this helpful? Yes No

What additional tools and materials are needed to install a Pro GEN II shower waterproofing kit?

  • Jigsaw (for subfloor drain hole) & drill (for pilot hole)
  • Premium modified (Latex/Polymer) thinset mortar (not premixed)
  • 5-gallon bucket
  • Mixer and caulking gun
  • 3/16"x 3/16" square notch trowel
  • Margin trowel
  • Utility knife
  • PVC or ABS cement, and section of coupler pipe for connection
  • Level
3 people found this helpful.  Did you find this helpful? Yes No

What is included in a complete Pro Gen II shower waterproofing kit?

A complete kit will include the following: 

  • Shower pan
  • 108 sq. ft. of waterproofing membrane
  • 33 linear feet of waterproof joint band
  • 4 pre-shaped inside corners
  • 1 drain flange with ABS or PVC neck (check your local standards for using ABS or PVC)
  • Drain grate riser with construction plug and hair trap
  • Drain grate cover
  • Curb piece/s
  • 2 outside corners for the curb

Note: If you elect to include floor heating, a complete kit will also include a TempZone Shower Floor Heating Mat, an nSpire Touch programmable thermostat, and a Circuit Check. 

2 people found this helpful.  Did you find this helpful? Yes No

View all 14 Questions and Answers

Customer Reviews

Shower Kits achieved an average rating of 5.0 stars with 1 reviews by our customers.

Have you used this product before? Leave a review

Shower kit

Collin F., Kootenai, ID on 01/10/2021

I liked the WarmlyYours shower kit it is straight forward and easy to use. Takes one day to get your shower prepped for tile.

View all customer reviews