ET-CL-CU-SLS-16 Frequently Asked Questions

Q: Can I plug self regulating cable into an electrical outlet?

WarmlyYours offers a conversion kit ( SR-PLUG-KIT ) to enable a plug-in requirement. This kit includes ground fault equipment protection ( GFEP ). The receptacle must be 120V, grounded, and approved for wet locations if located outside. The self regulating cable must not exceed 140‘ in length.

Don't see the answer you're looking for? Post your question

Frequently Asked Questions

Showing all 3 questions

Can self-regulating cable be installed on EPDM or rubber roofs?

WarmlyYours self-regulating roof and gutter de-icing cable can be used on rubber or EPDM (Ethylene Propylene Diene terpolyMer) roofs.

The primer that WarmlyYours sells is specifically for adhering clips to EPDM or rubber roofing.

1 person found this helpful Was this helpful? Yes No

Can I plug self regulating cable into an electrical outlet?

WarmlyYours offers a conversion kit (SR-PLUG-KIT) to enable a plug-in requirement. This kit includes ground fault equipment protection (GFEP). The receptacle must be 120V, grounded, and approved for wet locations if located outside. The self regulating cable must not exceed 140‘ in length.

Was this helpful? Yes No

Can I use aluminum 3-prong clips on a Copper metal roof (or Copper surface) ?

No. Aluminum 3-prong clips can cause rapid galvanic corrosion if they come in direct contact with copper. WarmlyYours recommends using our Self-Regulating roof & gutter cable fastened with 3-prong Copper clips (ET-CL-CU-P25) and double-sided adhesive pads (ET-VHB-PAD-P25) for this application.

Was this helpful? Yes No