Stand Attachments (2x) for Plug-in Ember Flex Infrared Heating Panels
Description
These 2 secure and low-profile stand attachments will allow you to stand up your plug-in Ember Flex radiant heating panel with the longest dimension horizontal. This is great for offices or for areas where it’s not practical to attach a heating panel to the wall or ceiling.
This accessory is compatible with all Ember Flex infrared heating panels. It does not work with Ember Glass or Ember Mirror infrared heating panels.
Specifications
Product Dimensions
| Depth | 7.87″ |
| Height | 1.77″ |
| Weight | 0.4 lbs |
| Width | 2.36″ |
Construction
| Material | Powder-coated white aluminum |
Identifiers
| SKU | IP-EM-ACC-STND |
| UPC (GTIN-12) | 881308067403 |
Documents
Frequently Asked Questions
Showing all 5 questions
Radiant heat travels through air, and typically heats up objects closer to the panel first and then the rest of the room later. Infrared heating from the panel can be easily detected from about 3-4 feet. Ideally, the infrared heating panel should be aimed onto the area with more use, since that will be the surface that will warm up first.
Only the Ember Flex infrared heating panels can be mounted from the ceiling and they come with all of the necessary hardware to accomplish this.
None of the infrared heating panel heaters from the Ember Glass or Ember Mirror lines can be mounted from the ceiling.
The startup heating time for this infrared heating system is approximately 5 to 10 minutes. However, your room will not feel warmer immediately because the cold objects in the room (furniture, walls, ceilings, floors, etc.) need to warm up first. Once these surfaces are heated via infrared heating, the warmth will spread throughout the room.
