Cold Lead Twin 120V, 17 AWG, 1′
Notices
Quebec Repairability Notice
Avis important pour les consommateurs du Québec:
WarmlyYours n’offre pas de services de réparation pour ce produit. Les seules pièces de rechange disponibles sont les kits de raccordement (splice kits) ; l’élément chauffant lui-même n’est pas offert comme pièce de rechange. Si votre système de chauffage par le sol intérieur tombe en panne pendant la période de garantie, nous remplacerons l’unité complète conformément à notre politique de garantie. Notre équipe d’assistance technique est disponible 24h/24 et 7j/7 par téléphone pour toute aide à l’installation ou au dépannage. Pour plus de détails, consultez notre politique de retour. Cet avis est fourni conformément à la Loi sur la protection du consommateur du Québec, article 39 (telle qu’amendée en 2025).
Important Notice for Québec Consumers:
WarmlyYours does not provide repair services for this product. The only replacement parts available are splice kits; the heating element itself is not available as a replacement part. If your indoor floor heating system fails within the warranty period, we will replace the entire unit according to our warranty policy. Our technical support team is available 24/7 by phone for installation and troubleshooting assistance. For full details, see our Return Policy. This notice is provided in accordance with Québec’s Consumer Protection Act, section 39 (as amended in 2025).
Description
Add flexibility to your project with WarmlyYours cold lead. The WarmlyYours cold lead allows you to surpass the length of the factory-provided cold lead so that you can place your thermostat wherever it’s convenient. This cold lead is compatible with our 120 V twin-conductor TempZone™ floor-heating systems rated at 9 amps or below with yellow, black and green cold leads. Purchase the cold lead by the foot to reach your desired length.
*Compatible with 120 V TempZone™ Twin Flex Rolls, Easy Mats, Cable, Shower Mats and Bench Mats.
Specifications
Cabling Specs
| Ideal Cable Spacing | 3″ |
Product Dimensions
| Length | 0.1″ |
| Weight | 0.0013 lbs |
| Width | 0.1″ |
Identifiers
| SKU | CL-TWIN-120-17 |
| UPC (GTIN-12) | 881308021276 |
Electrical
| Voltage | 120 V |
| Wire Gauge | 17 AWG |
See This Product in Action
Documents
Technical Information
Frequently Asked Questions
Showing all 5 questions
While WarmlyYours electric radiant floor heating systems are typically installed by your floor covering contractor, a licensed electrician is recommended for the final thermostat hook-up. With every quote, we provide an Installation Plan layout, together with an electrical plan that has all the info required for the electrician.
Yes, you can add radiant heating to an existing slab using "over-the-slab" systems like TempZone™ Flex Rolls or Easy Mats. These low-profile electric systems are installed on top of the existing concrete using thinset or self-leveling underlayment, allowing you to add warmth without tearing out the original floor.
Reflective insulation is not effective with conductive heating, which is how embedded floor heating and snow-melting systems transfer heat. To be effective, the reflective insulation surface needs to face an air space (air gap), which allows the reflected heat to be redirected.
An effective solution considers the insulating material's R-Value. This is the rating of a material's insulating properties. The "R" stands for "resistance" and refers to the material's resistance to heat flow, or temperature conduction.
