Towel-bar mounting locations for supported 47 × 24-inch and 35 × 24-inch Ember panels.
For supported Ember panels mounted vertically, the manual provides two towel-bar positions:
- 47 × 24-inch models: mounting points 16¾ inches from the top and bottom of the panel.
- 35 × 24-inch models: mounting points 9 inches from the top and bottom.
Up to two towel bars can be fitted using the existing holes and the supplied installation instructions. Do not drill new holes in the heating panel.
The accessory does not fit the 35 × 12-inch Ember Flex model IP-EM-FLX-WHT0300-W. A towel on the lower bar will warm primarily where it lies in front of the radiant panel.
Sources
- Manufacturer instructions (publication 3865), PDF pp. 6–7, section 3.1.3.
