PRO-Tect Plug-In Heat Tape for Pipes — 48 ft, 7 W/ft, 120V, Kit
This product is discontinued.
This support page provides publications, manuals, specifications, videos, and common support questions
Support Questions
Showing all 3 questions
Cable temperature depends on the product, surrounding conditions, installation, and controls. Do not assume a universal surface-temperature range. Follow the exact cable and pipe manufacturers’ limits, particularly for plastic pipe, and use the specified insulation and thermostat placement.
Pipe heat tape electricity use depends on cable length, power output, run time, and controls. For a fixed-output cable, watts = length in feet × W/ft. A 30-foot, 7 W/ft kit draws 210 watts while energized; eight energized hours uses 1.68 kWh. Multiply by your local rate for cost. Thermostat duty cycle and self-regulating output change actual consumption.
WarmlyYours does not recommend using an extension cord for permanent installations. Pipe heat should always be plugged directly into a receptacle or hardwired to the circuit that is powering it.
Documents
Installation
- Constant Wattage Pipe Freeze Protection System Installation Manual (English)
- Constant Wattage Pipe Freeze Protection System Installation Manual (French)
- Self-Regulating Pipe Freeze Protection PT-DUAL Installation Sheet A (English)
Sell Sheets
- PRO-Tect Plug-In Heat Tape for Pipes (Constant Wattage) Sell Sheet Canada (English)
- Self-Regulating Pipe Freeze Protection Dual-Zone Control PT-DUAL Sell Sheet (English)
- Self-Regulating Pipe Freeze Protection Single-Zone Control PT-SINGLE Sell Sheet (English)
Operation Manuals
Specifications
Electrical
| Amps | 2.8 A |
| Voltage | 120 V |
| Watts | 336 W |
Logistics
| Package Contents | (1) Pipe Tracing Heat 48-ft Cable Kit 7-W per ft (PTC120-7W-048-WY) |
Identifiers
| SKU | PTC120-7W-048-WY |
| UPC (GTIN-12) | 881308054069 |