Cold Lead Twin 120V, 17 AWG, 1′
Description
Add flexibility to your project with WarmlyYours cold lead. The WarmlyYours cold lead allows you to surpass the length of the factory-provided cold lead so that you can place your thermostat wherever it’s convenient. This cold lead is compatible with our 120 V twin-conductor TempZone™ floor-heating systems rated at 9 amps or below with yellow, black and green cold leads. Purchase the cold lead by the foot to reach your desired length.
*Compatible with 120 V TempZone™ Twin Flex Rolls, Easy Mats, Cable, Shower Mats and Bench Mats.
Specifications
Cabling Specs
| Ideal Cable Spacing | 3″ |
Product Dimensions
| Length | 0.1″ |
| Weight | 0.0013 lbs |
| Width | 0.1″ |
Identifiers
| SKU | CL-TWIN-120-17 |
| UPC (GTIN-12) | 881308021276 |
Electrical
| Voltage | 120 V |
See This Product in Action
Frequently Asked Questions
Showing all 5 questions
While WarmlyYours electric radiant floor heating systems are typically installed by your floor covering contractor, a licensed electrician is recommended for the final thermostat hook-up. With every quote, we provide an Installation Plan layout, together with an electrical plan that has all the info required for the electrician.
Cork flooring can be used with floor heating if the r-value is under 1. You will need to find the r-value of the flooring you choose and let your account manager know during the design stage. Cork flooring should have a low r-value to minimize trapped heat.
A Warmly Yours indoor floor heating system should not be installed with a GFCI breaker because GFCI protection is built into the thermostat and power module. And while it's not always required, we strongly recommend a dedicated circuit for each thermostat and power module to limit the occurrence of ground fault nuisance tripping caused by multiple GFCI devices on a circuit. The amperage of a breaker would depend on the amp draw of the heating system. For example, a TempZone Flex Roll (which provides approximately 15 watts of energy output per square foot) that is providing 15 square feet of heating coverage will draw only 225 watts ( 1.9 Amps), so a 15 Amp circuit would suffice. Always size breakers according to your local Electrical Code requirements.