Contact Us After Hours

Loading...

Loading contact options...

Sign In

Loading...

Loading...



Cold Lead Twin 240V, 17 AWG, 1′



$4.90
Was $7

Voltage 240 V
Wire Gauge 17 AWG

Features

  • 17 AWG cold lead for compatible 240 V TempZone twin-conductor floor-heating systems rated at 9 A or less.

  • For Flex Rolls, Easy Mats, heating cable, Shower Mats and Bench Mats with red, black and green cold leads.

  • Sold by the foot to extend the factory cold-lead reach.

Description

Extend your reach with WarmlyYours cold lead. This cold leadis compatible with our 240 V twin-conductor TempZone™ floor-heating systems rated at 9 amps or below with red, blackand green cold leads. When the factory-provided cold lead isn’t long enough,purchasing our cold lead by the foot will give you the flexibility needed tocomplete your project.

*Compatible with 240 V TempZone™ Twin Flex Rolls and Cable. 

Specifications

Cabling Specs

Ideal Cable Spacing 3″

Product Dimensions

Length 0.1″
Weight 0.0013 lbs
Width 0.1″

Identifiers

SKU CL-TWIN-240-17
UPC (GTIN-12) 881308021962

Electrical

Voltage 240 V
Wire Gauge 17 AWG

Frequently Asked Questions

Showing all 1 questions

Please keep in mind that you must check your electric floor heating system with a digital ohmmeter in conjunction with a Circuit Check™. Take an initial reading as soon as you take the product out of the box to verify that it is within -5% / +10% of the values stated on the product’s label. This will give you a basis of comparison for future readings. Take a second reading once you have positioned the system to match your custom installation plan. It is also advisable to take an additional reading in the middle of the tile installation, just to make sure that the Circuit Check™ is doing its job. Then, take a final reading when you are finished with the floor installation and are ready to hook up the thermostat.

The Circuit Check™ is a tool developed by WarmlyYours to give you peace of mind and ensure trouble-free installations. Simply hook up the cold leads to the tool while you position the system to match your custom installation plan.

The Circuit Check™ will continuously monitor the continuity of the circuit during the installation of your system and during the installation of your flooring. The Circuit Check™ beeps immediately when a short in the system is detected, alerting you to a potentially damaged cable in the area you are working, before you lay the tile over the electric floor heating system.
 The WarmlyYours technical support team is available 24/7 to provide assistance if the alarm sounds, or if you would have any questions during your installation.

15 people found this helpful
Was this helpful?

Customer Reviews