Contact Us After Hours

Loading contact options...

Sign In

Loading...

Radiant Floor Heating Frequently Asked Questions

Don't see the answer you're looking for? Post your question

Frequently Asked Questions

Showing 10 of 32 questions

WarmlyYours’ TempZone™ product is most commonly installed under tile, stone, and marble flooring, but can also be installed under many other popular floor covering options such as hardwood, vinyl and linoleum. We also have our Environ system, which is an electric floor heating product as well and is specially designed for installation under carpet (in the U.S. only), laminate and floating wood. WarmlyYours can accommodate any flooring type with either of the electric radiant floor heating products that we offer. If your flooring type isn't listed here, just give us a call at (800) 875-5285 and we will be happy to discuss it with you.

29 people found this helpful Was this helpful? Yes No

To prevent any melting, ensure that the heating wire is at least 4” from the toilet wax ring.

17 people found this helpful Was this helpful? Yes No

Electric radiant floor heating should not be installed under permanent fixtures that may trap heat. However, if the vanity or cabinets are "floating" or are on legs, then a floor heating system may be installed under it.

16 people found this helpful Was this helpful? Yes No

Yes, the drying effects of electric radiant floor heating will reduce the humidity coming from the slab, which is the largest source of moisture.

11 people found this helpful Was this helpful? Yes No

A typical bathroom floor can be heated for about a quarter a day with electric radiant floor heating.

8 people found this helpful Was this helpful? Yes No

A floor heating system can work as a supplemental heating source and make the basement warmer. If more heat needs to be added to the room, you can experiment with setting the floor heating thermostat to higher temperatures.

6 people found this helpful Was this helpful? Yes No

Reflective insulation is not effective with conductive heating, which is how embedded floor heating and snow-melting systems transfer heat. To be effective, the reflective insulation surface needs to face an air space (air gap), which allows the reflected heat to be redirected.

An effective solution considers the insulating material's R-Value. This is the rating of a material's insulating properties. The "R" stands for "resistance" and refers to the material's resistance to heat flow, or temperature conduction.

1 person found this helpful Was this helpful? Yes No

Yes, many homeowners successfully install bathroom floor heating systems themselves. WarmlyYours provides detailed installation manuals, 24/7 technical support, and custom installation plans to guide you through the process. However, a licensed electrician is required to perform the final electrical connections and thermostat wiring to ensure safety and warranty compliance.

Was this helpful? Yes No

Yes, electric radiant floor heating can maintain a cozy 70°F even when outside temperatures drop well below zero. By heating the objects and people in a room directly, a properly sized and insulated system provides reliable, consistent warmth that outperforms traditional forced-air systems during extreme Midwestern winters.

Was this helpful? Yes No

Yes, radiant floor heating can be a primary heat source if its heat output exceeds the room's heat loss. For best results, we recommend using a 15-watt system, covering at least 80% of the floor, and ensuring the space is well-insulated. Use our Heat Loss Calculator to verify your specific needs.

Was this helpful? Yes No

Yes, radiant floor heating is an excellent primary heat source for tiny houses in mild to moderate climates. Because tiny houses have small footprints, the 15-watt output of TempZone™ can easily maintain comfort while saving valuable wall space. Ensure the structure is well-insulated and use our Heat Loss Calculator to confirm.

Was this helpful? Yes No

Yes, bedroom floor heating can be a DIY project. Systems like TempZone Easy Mats or Environ Flex Rolls are designed for straightforward installation under various flooring types. While you can lay the heating elements and flooring yourself, you must hire a certified electrician to connect the system to power and install the thermostat.

Was this helpful? Yes No

Yes, you can put radiant floor heat under hardwood. Electric floor heating systems are designed to work safely and efficiently under both nailed hardwood floors and engineered wood. They provide consistent, comfortable warmth without damaging the wood, making radiant heat an excellent choice for your hardwood flooring.

Was this helpful? Yes No

Moisture control depends on the concrete slab, flooring, and heating assembly. Test the slab and follow the flooring, mortar, and heating manufacturers’ requirements for a compatible moisture-control system and its location. Do not place a loose sheet vapor barrier between layers that must bond to one another. Address water intrusion or hydrostatic-pressure problems before installing floor heating or finished flooring.

Was this helpful? Yes No

Yes, insulating underlayment is highly recommended when installing floor heating over concrete. It prevents the slab from acting as a "heat sink," which draws heat away from the floor. Using insulation like CeraZorb® ensures faster heat-up times and significantly improves the energy efficiency of your system.

Was this helpful? Yes No

Insulation is critical when installing floor heating over concrete. Without it, the slab absorbs much of the heat, leading to slow warm-up times and wasted energy. Products like CeraZorb® provide a thermal break that directs heat upward into the flooring, maximizing comfort and reducing operating costs.

Was this helpful? Yes No

Yes, we strongly recommend installing insulation like ThermalSheet™ over concrete slabs. Concrete acts as a "heat sink," absorbing warmth that should go to your floor. Insulation directs the heat upward, significantly improving efficiency, reducing warm-up times, and allowing the system to function effectively as a primary heat source.

Was this helpful? Yes No

Underlayment is recommended for floating floors (laminate, LVP, wood) and installations over cold subfloors like concrete. It provides thermal insulation to prevent heat loss and improves system efficiency. For tile and stone, the system is typically embedded in thinset, so a separate underlayment is often unnecessary.

Was this helpful? Yes No

To prepare a basement for radiant heating, ensure the concrete subfloor is level, clean, and free of debris. It is highly recommended to install a thermal break, like WarmlyYours CeraZorb, over the slab to prevent heat loss into the ground. Finally, verify that your electrical panel has sufficient capacity for the system's requirements.

Was this helpful? Yes No

The operating cost for electric floor heating is surprisingly low. On average, it costs about $0.05 to $0.10 per square foot per month to run a system for 8 hours a day. You can calculate your specific costs using our C$0.15/hr tool or by using the

Operating Cost Calculator for Floor Heating

Estimate your daily and monthly energy costs based on room size and local rates.
sq. ft.
¢/kWh
Estimated Cost
C$0.04
per hour
C$0.15
per day
C$4.50
per month
Rae Radiant

"Most homeowners are surprised how affordable radiant floor heating is to operate—often just pennies a day for a bathroom. It's the kind of everyday luxury that pays for itself in comfort!"

— Rae Radiant
on our website.

Was this helpful? Yes No

Radiant floor heating costs vary by system type and project size. Electric floor heating mats or cables typically range from $5 to $12 per square foot. Total project costs also include a thermostat (starting around $100) and installation labor. For an accurate estimate tailored to your room, use our

Operating Cost Calculator for Floor Heating

Estimate your daily and monthly energy costs based on room size and local rates.
sq. ft.
¢/kWh
Estimated Cost
C$0.04
per hour
C$0.15
per day
C$4.50
per month
Rae Radiant

"Most homeowners are surprised how affordable radiant floor heating is to operate—often just pennies a day for a bathroom. It's the kind of everyday luxury that pays for itself in comfort!"

— Rae Radiant
.

Was this helpful? Yes No

Because radiant systems have a thermal lag, you should increase your thermostat set point 12-24 hours before an extreme cold snap arrives. This proactive adjustment, combined with ensuring your home is well-insulated, helps your system maintain a steady, comfortable temperature without struggling to catch up.

Was this helpful? Yes No

Yes, electric radiant floor heating is ideal for basements because it warms the cold concrete slab and provides consistent heat from the ground up. In well-insulated finished basements, it can serve as the primary heat source, turning a typically chilly space into a comfortable, year-round living area.

Was this helpful? Yes No

Radiant floor heating can heat a sunroom if the space has high-quality insulation and double-pane glass. Since sunrooms have high heat loss, a 15-watt system is essential. In extremely cold climates or poorly insulated sunrooms, it is best used as a supplemental source to keep the floor comfortable.

Was this helpful? Yes No

Radiant heating is often more efficient because it eliminates the "blast and fade" cycles and noisy ductwork of forced-air furnaces. By providing steady, low-level heat that doesn't escape to the ceiling, it creates a more consistent "barefoot sanctuary" while potentially reducing your overall energy consumption.

Was this helpful? Yes No

Yes, radiant heating is highly efficient in cold weather. Unlike forced-air systems that lose heat through ductwork and rising air, radiant heat warms objects directly via far-infrared energy. This method is up to 45% more energy-efficient, providing consistent comfort while significantly lowering monthly heating costs in frigid environments.

Was this helpful? Yes No

For the same wattage and operating time, 120V and 240V electric floor heating use the same amount of energy and produce the same heat. A 240V system draws less current for the same wattage, which can accommodate a larger heated area on a suitable circuit. Choose the heating product and control voltage to match the supply, and have an electrician verify circuit capacity, wiring, and applicable code.

Was this helpful? Yes No

The best home features for cold climates include a simple gable roof to shed snow, covered entrances for protection, airtight triple-pane windows to prevent heat loss, and radiant heating systems. These features work together to maintain interior warmth, reduce energy bills by up to 25%, and ensure structural safety during harsh winters.

Was this helpful? Yes No

For maximum barefoot comfort, most systems are designed to reach a floor surface temperature of 80°F to 85°F. This "sweet spot" ensures your room stays warm through efficient radiation while keeping the floor perfectly comfortable to walk on, even during the coldest months of the year.

Was this helpful? Yes No

A heat loss calculation is essential to ensure your radiant system produces more BTUs than your room loses to the outside environment. This professional assessment guarantees your system has the necessary power to serve as your primary heat source, providing peace of mind during record-breaking cold.

Was this helpful? Yes No

Bedroom floor heating is popular because it provides consistent, draft-free warmth that enhances comfort in a space where people often walk barefoot. It eliminates cold spots, operates silently, and is highly energy-efficient. Additionally, radiant heat doesn't circulate dust or allergens, contributing to a healthier sleeping environment compared to forced-air systems.

Was this helpful? Yes No

A floor sensor measures floor temperature so a compatible thermostat can regulate comfort and enforce the flooring manufacturer’s temperature limit. Some thermostats, including nTrust 2.0, offer a regulator mode without a sensor, but that mode does not measure floor temperature. Use sensor-based temperature control whenever required by the flooring or heating-system instructions.

Was this helpful? Yes No