PRO-Tect: Pipe Freeze Protection Single-Zone Control with GFEP
Features
-
Available max power outputs: 5W per linear ft., 8W per linear ft., and 10W per linear ft
-
Options for 120, 208, 240, and 277 voltages
-
Automatically varies wattage for optimal energy savings
-
Can be overlapped or criss-crossed
-
Safe: cUlus Listed and cCsaus Listed
Description
The PT-SINGLE is a control that can be used with WarmlyYours PRO-Tect Self-Regulating Heat Tape for Pipes for most commercial (non-hazardous) and residential pipe freeze protection or process heating applications. This control comes with single temperature sensor and a built-in relay, which will allow it to control a heating circuit with a resistive load of up to 30-amps. Another added benefit of this control is that the integrated Ground Fault Equipment Protection (GFEP) in the heating circuit eliminates the need for GFEP protection in a circuit panel, which can significantly save on cost. The temperature set-points for the control are adjustable from −99.9 °F to 999 °F (Note: please confirm the separate temperature rating of the heating element/s you use with the control) though the included sensor has an operating range of −40 °F to 230 °F. There are 2 temperature sensor inputs and the heating circuits can operate independently or from 1 sensor.
Features:- Compatible Voltages: 100 – 277 VAC
- Load Rating for Heating Circuit: 30-amps
- Included Temperature Sensors: 1 sensor (100k ohms) with 20’ lead-length
- Ground Fault Equipment Protection (GFEP): Self-test GFEP
- Outdoor Rating: NEMA 4X
- Ingress Protection Rating: IP66
- Area of Use: Nonhazardous Locations
- Warranty: 2 years
- Certifications: UL and CSA listed
Specifications
Electrical
| Activation Temperature | -99.9 to 999 °F |
| Connection Method | Hardwired |
| Ground Fault Equipment Protection (GFEP) | Self-test GFEP (Adjustable 1-300mA) |
| Maximum Load (Resistive Only) | 30 A |
| Voltage | 100 - 277 VAC |
Warranty / Certifications
| Approvals | UL and CSA listed |
| Area of Use | Non-hazardous locations |
| Ingress Protection (IPxx) Rating | IP66 |
| Warranty | 2 years |
| Waterproofing | NEMA 4X |
Product Dimensions
| Depth | 4.375″ |
| Height | 5.5″ |
| Installed Depth | 0.75″ |
| Weight | 2.7 lbs |
| Width | 8.125″ |
Thermostat
| Included Sensor | 100k ohms, 20' lead |
Identifiers
| SKU | PT-SINGLE |
| UPC (GTIN-12) | 881308058319 |
Documents
Installation
- Self-Regulating Pipe Freeze Protection PT-DUAL Installation Sheet A (English)
- Self-Regulating Pipe Freeze Protection PT-SINGLE Installation Sheet A (English)
Operation Manuals
- Self-Regulating Pipe Freeze Protection PT-DUAL Manual (English)
- Self-Regulating Pipe Freeze Protection PT-SINGLE Manual (English)
Technical Information
Sell Sheets
- Self-Regulating Pipe Freeze Protection Dual-Zone Control PT-DUAL Sell Sheet (English)
- Self-Regulating Pipe Freeze Protection Single-Zone Control PT-SINGLE Sell Sheet (English)
Catalogs
Frequently Asked Questions
Showing all 5 questions
Simply put, yes--the right type of heat tape will really keep your pipes from freezing. By applying gentle heat, heat tape can prevent the water in your pipes from turning to ice and blocking the flow of water--or worse. Combined with proper insulation, heat tape regulates the overall temperature of your water pipes.
Heat tape is electrical equipment: improper installation, damaged cable, or misuse can cause fire or electric shock. Select cable approved for your pipe and location, follow its layout and insulation requirements, provide the specified electrical protection, and inspect it before each cold season. Do not use damaged equipment or overlap cable unless the exact product instructions permit it.
Pipe heat tape is intended for freeze prevention, not as a guaranteed way to thaw an already frozen pipe. A frozen pipe may be damaged. Have the plumbing assessed and thawed safely by a qualified professional; never use an open flame. Before future cold weather, verify cable selection, thermostat placement, insulation, and electrical protection.
