Pro GEN II Solid Polystyrene Shower Curb - 2′ Long
Features
-
An easy-to-clean integrated hair trap in the drain
-
A stronger drain flange
-
A wider variety of high quality drain grate covers
-
A denser shower pan which allows for the installation of a greater range of tile types, including glass tile
Description
This 2-foot section of dense polystyrene can serve as the structure for a tiled shower curb. This curb works with a variety of tile shower waterproofing systems and membranes. It is constructed of durable, lightweight material that can be easily cut down to a desired size. A v-groove runs the entire length of the bottom which will create a strong dovetail hold with the cured thinset that adheres the curb to the subfloor.
Specifications
Identifiers
| SKU | SH-271796 |
| UPC (GTIN-12) | 857937008254 |
Product Dimensions
| Weight | 1 lbs |
Documents
Frequently Asked Questions
Showing all 5 questions
Pre-formed pans are easily modifiable and easy to install on any substrate. They are great for DIY, as well as for a fast and clean installation by a professional. Drypack kits do not work well for tiles smaller than 2" x 2" without additional work.
- Jigsaw (for subfloor drain hole) & drill (for pilot hole)
- Premium modified (Latex/Polymer) thinset mortar (not premixed)
- 5-gallon bucket
- Mixer and caulking gun
- 3/16"x 3/16" square notch trowel
- Margin trowel
- Utility knife
- PVC or ABS cement, and section of coupler pipe for connection
- Level
A complete kit will include the following:
- Shower pan
- 108 sq. ft. of waterproofing membrane
- 33 linear feet of waterproof joint band
- 4 pre-shaped inside corners
- 1 drain flange with ABS or PVC neck (check your local standards for using ABS or PVC)
- Drain grate riser with construction plug and hair trap
- Drain grate cover
- Curb piece/s
- 2 outside corners for the curb
Note: If you elect to include floor heating, a complete kit will also include a TempZone Shower Floor Heating Mat, an nSpire Touch programmable thermostat, and a Circuit Check.
For shower kits, most of the modified thinsets you are looking for are listed as compliant with ANSI 118.4 and ANSI 118.11. Unmodified thinsets will be listed as compliant with ANSI 118.1. Modified thinset is an industry term for any thinset mortar which has additives (usually latex or acrylic).