Palma Towel Warmer, Polished, Plug-in, 4 Bars


Palma Towel Warmer, Polished, Plug-in, 4 Bars
Support Page
Also Available on Amazon

Affiliate disclosure: As an Amazon Associate, we may earn commissions from qualifying purchases from Amazon.com

Features

  • Compact 4-Bar Design: The Palma towel warmer uses 4 polished chrome stainless steel bars to evenly distribute heat, and is best suited to warming 1 towel at a time

  • Plug-In: This wall-mounted, plug-in model features a 5.9-foot long cord and plugs into any standard 120-volt outlet

  • TempSmart Overheat Protection: This model comes with built-in TempSmart overheat protection to prevent the unit’s surface temperature from exceeding 149°F (65°C)

  • Easy To Clean: The straight bars are made of durable stainless steel construction

  • 5-Year Warranty: The Palma is covered by our manufacturer’s warranty for peace of mind

Palma Description

The compact and economical Palma towel warmer from WarmlyYours provides all of the functionality of larger models, while taking up less wall space. The 4 evenly spaced bars have a heat output of 119 BTUs per hour, which means this unit will not only warm your towels and bathrobes but it can also dry them between uses. This wall-mounted model, with its plug-in connection, is very DIY-friendly and its 304-stainless steel construction means that the Palma is durable and easy to maintain. The square bars, linear design, and highly polished finish means this unit will be a functional and attractive addition to any room. This model comes with built-in TempSmart™ overheat protection to prevent the unit’s surface temperature from exceeding 149°F (65°C).

Features:

  • Dimensions: 19.68” (500 mm) H x 17.71” (450 mm) W x 4.33” (110 mm) D
  • 35 watts, heat output of 119 BTUs per hour
  • 4 heated, square bars
  • Polished finish, 304-stainless steel
  • 5.9’ (1.8 m) plug-in cord for 110 – 120 VAC connection
  • Integrated power switch with indicator light.
  • Safe: cULus Listed with built-in overheat protection
  • Warranty: 5 years
  • Lifetime technical support from WarmlyYours

Specifications

Electrical

Amps 0.29 A
Connection Method Plug-in
Cord Length 71″
Ingress Protection (IPxx) Rating IP55
Ohms 411.43 Ω
On/Off Switch Yes
Plug-Type NEMA 5-15 (Type B)
Voltage 120 V
Watts 35 W

Warranty / Certifications

Approvals cULus listed
Warranty 5-year limited warranty

Performance

Average Surface Temperature 122°F / 50°C
BTU Per Hour 119
Heat-up Time 15-20 minutes
TempSmart Safety Limit 149°F - 167°F / 65°C - 75°C
Towel Capacity 1

Appearance

Bar Arrangement Evenly spaced
Bar Shape Square
Finish Polished
Mounting Method Wall Mounted
Steel Type 304-stainless steel
Style Modern
Towel Bars 4-bars

Logistics

Country of Origin (COO) China
Package Contents Towel Warmer, installation manual and hardware kit

Product Dimensions

Depth 4.33″
Height 19.68″
Mounting Footprint 16 ½“ (419mm) W x 12 ½“ (318mm) H
Width 17.71″

Identifiers

SKU TWS2-PLM04PP
Towel Warmer Collection Name Classic Collection
UPC (GTIN-12) 881308054465

Customer Questions & Answers

Palma has 32 Questions and Answers.

Don't see the answer you're looking for? Post your question

Can I install the towel warmer myself or do I need to hire someone to do it for me?

Each towel warmer comes with an instruction manual which fully explains how to install the device from start to finish. If you can hang a picture, you can probably install a heated towel rack. However, for hardwired models, you will need a licensed professional who is certified to do electrical wiring for the final hook-up. 

17 people found this helpful.  Did you find this helpful? Yes No

How hot does the towel warmer actually get and is there any possibility of damage?

The heated towel rack will heat up to between 100 and 140 degrees Fahrenheit. It will not produce sufficient heat to injure you if you touch or brush up against it, though you should still exercise caution around the device. Please note that once a heated towel rail is warmed up, the surface temperature will remain constant and can't be adjusted incrementally. 

The heated towel racks have a built-in offset from the wall (the size of the offset will depend on which model you purchased); the offset provides sufficient clearance to prevent any damage to the wall. You should also maintain a distance of four inches between the towel warmer and surrounding fixtures.

Additionally, nearly all of our electric towel warmer models* come with built-in TempSmart™ overheat protection which will shut the unit down automatically if the unit's surface exceeds the safety limit of between 149°F (65°C) and 167°F (75°C).

*Excludes the Elements model.


13 people found this helpful.  Did you find this helpful? Yes No

Can the electric towel warmer be installed “upside down” to change the power access point?

Yes, most of our wall-mounted towel warmers have a fixed power location in the lower right corner.  All of our heated towel racks are electric "dry" (liquid/oil-free) units and most can be installed "upside down". Doing so will result in the power location relocating from the lower right corner to the upper left corner.

Please see the installation video here:  https://www.warmlyyours.com/en-US/video-media/towel-warmer-install

13 people found this helpful.  Did you find this helpful? Yes No

How do I use the towel warmer after it is installed?

Our towel warmers are designed for everyday use and all of them include an integrated on/off switch. Please note that the Ibiza model includes additional built-in timer options for controlling the unit. WarmlyYours also offers a wide array of controls that can be used with your heated towel rack. Depending on the control you select, you can program the heated towel rack to your schedule or operate it remotely. Just bear in mind that the heated towel rack is designed to gradually warm towels over the course of a day and does work best when towels are left to hang for about 3 hours.

11 people found this helpful.  Did you find this helpful? Yes No

Does the towel warmer have an automatic shutoff function?

The heated towel rack is designed to stay on at a relatively constant temperature to keep your bathrobes and towels fresh, warm, and dry. However, should you need to turn the unit off for any reason, you can use the integrated on/off switch on the unit. If you’re using a control for your heated towel rack, you may need to shut off the unit there as well. 

Most of our electric towel warmer models* come with built-in TempSmart™ overheat protection which will shut the unit down automatically if the unit's surface exceeds the safety limit of between 149°F (65°C) and 167°F (75°C). 

*Excludes the Elements model. 

10 people found this helpful.  Did you find this helpful? Yes No

View all 32 Questions and Answers

Customer Reviews

Palma achieved an average rating of 5.0 stars with 1 reviews by our customers.

Have you used this product before? Leave a review

Great size!

Greg C., Brooktondale, NY on 03/25/2022

Great size, for a small space. Installation was simple, and straight forward.

View all customer reviews