Luxury Radiant Floor Warming for a Spacious Bathroom in Escondido, CA

Large Bathroom Remodel Upgraded with Energy-Efficient TempZone™ Electric Radiant Floor Heating System

ESCONDIDO, CA
Original TempZone Project for Bathroom
Size: 156 sq. ft. Voltage: 240V Wattage: 2340 W Amps: 10 A Flooring: Tile, Marble or Stone Cost/hr *: $0.03

The homeowners of this expansive 156-square-foot bathroom in Escondido, California, sought a significant comfort upgrade to combat the perpetual chill of their large tiled floor. To solve this challenge, professional installers, Preferred Remodelers, installed a powerful TempZone™ Flex Roll electric floor heating system. The result is a luxurious, even, and highly energy-efficient floor warming solution that elevates the home's value and transforms the massive bathroom into a spa-like retreat.


Project Details

  • Location: Escondido, CA
  • Heated Space Type: Bathroom
  • Square Footage (Heated): 156 sq. ft.
  • Wattage, Volts, Amps: 2340 W, 240V, 10 A
  • Flooring Type: Tile, Marble or Stone (Ideal for excellent heat transfer)
  • Installer/Company: Preferred Remodelers
  • Operating Cost Per Hour: $0.03
    • Quick Breakdown (based on Escondido's average residential electricity rate of $0.34/kWh):
      • Cost/Day (8 hours of use): approx $0.27
      • Cost/Month (30 days of use): approx 8.16

Transforming a Cold Space with In-Floor Heating

The primary challenge in this large master bathroom was the cold, hard surface of the tile flooring. In a generous 156 sq. ft. space, cold floor surfaces can make the entire room feel unwelcoming, especially during the cooler mornings in Escondido. The homeowners wanted a premium, long-lasting solution that would provide supplemental heating and turn the room into a true luxury escape.

Preferred Remodelers selected the TempZone™ Flex Roll to deliver 15 watts per square foot of warmth, which is powerful and efficient enough for this large area and the heat demands of tile/stone flooring.1 The 3-foot-wide mat greatly simplified the installation across the large, open floor plan. The system was wired to the smart nJoy WiFi Thermostat, giving the homeowners precise, programmable, and remote control over their radiant floor heating. The outcome is a spectacularly comfortable bathroom where the floor is always perfectly warmed, enhancing the home's comfort, luxury, and market appeal.


Featured Products

  • TempZone™ Flex Roll : Our most popular electric floor heating product. The twin-conductor heating cable is affixed to a mesh backing for quick "cut-and-turn" installation under tile, stone, or marble. This 240V, 156 sq. ft. roll delivers 15 watts per sq. ft. for powerful, reliable floor warming.
  • nJoy WiFi ThermostatA sleek, programmable dual-voltage (120/240V) Wi-Fi enabled control that allows the homeowner to manage the in-floor heating system remotely via a smartphone app. Features a built-in GFCI, energy usage monitoring, and an easy-to-read LED touch interface.
  • Circuit CheckAn essential installation tool that continuously monitors the heating cable for any cuts or damage during the installation process, alerting the installer with an audible alarm. This ensures a successful, fault-free setup.

* This large 156 sq. ft. system costs just about $0.03 per hour -> approximately $0.27 per day -> less than $9.00 per month to run, assuming the system runs for 8 hours a day, 30 days a month.

Project Gallery

Quotes

These quotes are linked to this showcase and include the products used in this project or recommended for a similar-sized project.

Frequently Asked Questions


For this large, 156 sq. ft. bathroom in Escondido, CA, the electric floor heating system is very affordable to operate. Based on the local electricity rate of approximately $0.34/kWh, the maximum cost to run the system for an entire hour is only about $0.03. Running the system for a typical eight hours a day results in a daily operating cost of less than thirty cents.
Yes, the 15 watts per square foot output of the TempZone™ Flex Roll can often serve as the primary heat source in a well-insulated room like this bathroom. For optimal comfort and energy efficiency, WarmlyYours recommends performing a heat loss calculation, but in many modern applications, this system provides sufficient radiant heat to keep the entire space warm without relying on a central forced-air system.
The TempZone™ Flex Roll is ideal for installation directly beneath hard flooring materials like the Tile, Marble, or Stone used in this Escondido bathroom. These materials are highly conductive, meaning they transfer the heat from the cable quickly and efficiently to the room, making them the best choice for a fast, powerful floor warming experience.
Absolutely. Electric radiant floor heating is highly energy-efficient because it uses programmed schedules and a precise floor sensor to heat the room from the ground up, warming people and objects directly instead of simply heating the air. The ability to control the large 156 sq. ft. system remotely with the programmable nJoy WiFi Thermostat further maximizes energy savings by ensuring the system only runs when and where it is needed.
Tell Us About Your Project Our team of Radiant Experts is ready to help.

Contact Us

Have a question? We're here to help.

Add Photo or Floor Plan

By submitting this form, I understand and agree to WarmlyYours.com's Terms of Use and Privacy Policy.

Please complete the security verification below:

Your information is secure and will never be shared