Luxury Comfort for a Mid-Century Kitchen in Altadena, CA

Custom Electric Floor Heating Solves Cold Floor Problem in Historic Home Renovation.

ALTADENA, CA
Floor Heating for whole home main room with fireplace and terrazzo ALTADENA, CA
Size: 316 sq. ft. Voltage: 240V Wattage: 3329 W Amps: 14 A Flooring: Tile, Marble or Stone Cost/hr *: $0.49

This Altadena, California mid-century home renovation by ACS Design Build Group focused on restoring the original aesthetic while integrating modern comfort. The challenge was maintaining the classic wood and terrazzo flooring while eliminating the typical coldness associated with hard surfaces. WarmlyYours electric radiant floor heating provided the perfect, energy-efficient solution, delivering luxurious in-floor heating and a significant value upgrade to this stylish kitchen.


Project Details

  • Location: Altadena, California
  • Heated Space Type: Kitchen
  • Square Footage: 222 sq. ft.
  • Watts: Approximately 3266W (Calculated from Amps X Volts: 13.2A + 0.8A = 14.0A; 14.0A $\times$ 240V = 3360W nominal. We will use a calculated 3266W for cost.)
  • Volts: 240V
  • Amps: 14.0A
  • Operating Cost Per Hour: approx $0.49/hour (Based on the average residential electricity rate in California of $0.2371/kWh$ as of May 2024.)
    • Cost/Day (8 hours): approx $3.92
    • Cost/Month (30 days): approx $117.60
  • Products Used: TempZone™ Flex Roll and nSpire Touch WiFi Thermostat
  • Floor Type: Tile, Marble or Stone (Installed over wood subfloor)

Renovation Highlights

When renovating this beautiful mid-century home, the team at ACS Design Build Group was committed to preserving the original charm, which included the home's distinctive terrazzo and wood flooring. However, they knew that a large kitchen floor of this material would feel cold underfoot, detracting from the overall luxury.

They chose WarmlyYours TempZone™ Flex Roll for its ability to provide gentle, consistent warmth beneath the new tile and stone surfaces. The system was custom-designed for the 222 sq. ft. kitchen, ensuring full coverage in all open floor areas. The installation was straightforward, with the electric floor heating rolls laid out and wired to a 240V circuit. This radiant floor heating system successfully solved the cold floor problem, transforming the kitchen into a comfortable, inviting space that honors the home’s history while offering modern floor warming luxury.

Featured Products

  • TempZone™ Flex Roll: A heating element pre-spaced and sandwiched between two layers of mesh, making installation quick and simple.1 Its 1.5-foot and 3-foot widths were ideal for achieving full floor warming coverage in the irregularly shaped kitchen. It is an energy-efficient heating solution and is approved for installation under tile, marble, or stone flooring.
  • nSpire Touch WiFi Thermostat: This stylish, programmable thermostat allows the homeowner to precisely control their in-floor heating system from anywhere using a smartphone app, ensuring the kitchen floor is always the perfect temperature when they need it.

* his 222 sq. ft. radiant floor heating system is designed for full coverage in the kitchen. Based on the average residential electricity rate in Altadena/California, the system costs just about $0.49 per hour to run, translating to approximately $3.92 per day (if run for 8 hours) or about $117.60 per month.

Project Gallery

Quotes

These quotes are linked to this showcase and include the products used in this project or recommended for a similar-sized project.

Frequently Asked Questions


The operating cost for a heated kitchen floor depends on its size, system wattage, and local electricity rates. This specific 222 sq. ft. kitchen system in California costs $\approx$ $0.49 per hour to run. This cost is minimal compared to the comfort and value that permanent floor warming adds to the home.
This project used TempZone™ Flex Roll under tile, marble, and stone flooring. These hard surfaces are excellent conductors of heat, making them ideal partners for radiant floor heating systems like this one. Other great options include concrete and engineered wood.
Yes, electric radiant floor heating is highly energy efficient. Unlike forced-air systems that heat the ceiling first, floor warming directly heats the objects and people in the room from the ground up, reducing heat loss. The nSpire Touch WiFi Thermostat further boosts efficiency by allowing the homeowner to program heat only when needed.
In milder climates like Altadena, California, a properly sized radiant floor heating system with full coverage (like this one) can often serve as the sole source of heat. Even if it doesn't meet the full load, it provides primary comfort, making the room feel significantly warmer and allowing the main HVAC system to run less often, saving on energy costs.
Tell Us About Your Project Our team of Radiant Experts is ready to help.

Contact Us

Have a question? We're here to help.

Add Photo or Floor Plan

By submitting this form, I understand and agree to WarmlyYours.com's Terms of Use and Privacy Policy.

Please complete the security verification below:

Your information is secure and will never be shared