nJoy: Floor Protection and Frost Protection Settings. How to completely turn off the thermostat/heating.
Floor protection limits:
This type of limit will override the heating/regulation if the floor temperature measured by the sensor exceeds the thresholds set. If the temperature falls below the minimum threshold, the heating is switched on. If it rises above the maximum threshold, the heating is switched off. This limit feature is only active in the “Floor” and “Room with floor limits” modes.
Frost Protection:
There is an option of setting the thermostat in standby mode so that only frost protection is activated at 41°F. All other functions in the thermostat are switched off. Frost protection means that the thermostat activates the heating when the sensor measures a temperature at the minimum limit of 41°F. Standby and frost protection is active*. The orange dot is visible on the standby screen when frost protection is enabled and active.
If frost protection is enabled and active and the user touches one of the touch areas, the screen will show a snowflake for a few seconds, followed by the text FROST PROTECTED, followed by the standby icon. This will fade out and go back to standby mode. to completely turn the thermostat stat off, one should disable frost protection and then put it on standby. (Frost Protection can be turned ON or OFF in the app)