White Ember Glass 800W with Hardwired Programmable Timer


Part Number: EMGW-800-GK02
This support page provides publications, manuals, specifications, videos, support articles, and common support questions


question-mark
Common Support Questions (15)

publication
Publications and Manuals (4)

specifications
Specifications (23)

Videos (4)

Articles (6)

Similar Items (24)

Create a new Support Request

Common Support Questions


The power box, where the cord starts, is located at the lower-middle part of the panel (for vertical mount) or left-middle (for horizontal mount). See additional images in the product's image gallery.

Need more help? View support options

Radiant heat travels through air, and typically heats up objects closer to the panel first and then the rest of the room later. Infrared heating from the panel can be easily detected from about 3-4 feet. Ideally, the radiant panel should be aimed onto the area with more use, since that will be the surface that will warm up first.

Need more help? View support options

The power box, where the cord starts, is located at the lower-middle part of the panel (for vertical mount) or left-middle (for horizontal mount). See additional images in the product's image gallery.

Need more help? View support options

If you have a room with "average" insulation levels, take the square footage and multiply it by 7 or 8 watts per square foot. That will provide a good estimate of the watts needed to heat that space.

Need more help? View support options

Electric-resistance heating cables and systems have no polarity. This includes all current WarmlyYours heating elements.

Need more help? View support options

There is no on/off button. If you're using your dual connection Ember panel in the plug-in configuration, it can be unplugged when not in use or paired with compatible plug-in control devices like a timer. If you've elected to convert your dual connection panel to a hardwired connection, the panel should wired to a hardwired control option like a switch, a hardwired timer, or a hardwired thermostat.

Need more help? View support options

Radiant panels using infrared heating can get very hot on the surface (up to 275ºF). For safety, it is recommended that your infrared heating system be mounted out of the reach of children.

Need more help? View support options

Verify 120V power at the connection of the panel to the circuit at the junction box in the wall (for hardwired connections), or at the outlet (for plug-in connections). Each Ember heater has a built-in safety switch that turns off the heating element automatically if it overheats. By unplugging or disconnecting the unit and waiting for about 10 to 15 minutes, the safety switch will reset automatically and the unit will be operational again.

If you experience additional issues, please give us a call at 1-800-875-5285.

Need more help? View support options

Only the 35" x 24" and 47" x 24" Ember Flex radiant panels (IP-EM-FLX-WHT-0500-CW and IP-EM-FLX-WHT-0700-CW) can be mounted from the ceiling and come with all of the necessary hardware to accomplish this. The 35" x 12" Ember Flex panel and all panels from the Ember Glass and Ember Mirror lines can't be mounted from the ceiling.

Need more help? View support options

The heat conductor is carbon fiber pressed in an epoxy ceramic resin.

Need more help? View support options

The startup heating time for this infrared heating system is approximately 5 to 10 minutes. However, your room will not feel warmer immediately because the cold objects in the room (furniture, walls, ceilings, floors, etc.) need to warm up first. Once these surfaces are heated via infrared heating, the warmth will spread throughout the room.

Need more help? View support options

We do not recommend controlling these panels with dimmers.

Need more help? View support options


Publications and Manuals



Specifications


Electrical

Amps 6.7 A
Connection Method Plug-in or Hardwired
Cord Length 9.5 ft
Ohms 18 Ohm
On/Off Switch No
Voltage 120 VAC
Watts 800 W

Warranty / Certifications

Approvals cTUVus certified
Ingress Protection (IPxx) Rating IP65
RoHS Compliance 2002/95/EC (RoHS 1)
Warranty 5 years

Performance

BTU Per Hour 2730
Maximum Surface Temperature 212 F°

Product Dimensions

Depth 1.5 in
Length 47.2 in
Width 23.6 in

Appearance

Finish Glass White
Model Ember Glass White - 47″ x 24″
Size 47″ x 24″ - 800W

Installation

Mounting Locations Wall
Mounting Orientation Horizontal or Vertical

Identifiers

SKU EMGW-800-GK02
UPC (GTIN-12) 881308071479

Videos



Articles



Similar Items


Do you need support or specifications for a specific model? Identify your model below.



Speak to a radiant heating expert


Can’t find what you’re looking for? Create a Support Request