Replacement nSpire Touch/nSpire Touch WiFi Thermostat Faceplate with Austrian Crystals - Moonlight


Part Number: FACE-SC-FB-ML
This support page provides publications, manuals, specifications, videos, and common support questions


question-mark
Common Support Questions (4)

publication
Publications and Manuals (0)

specifications
Specifications (3)

Videos (1)

Create a new Support Request

Common Support Questions


The breaker and wire sizes are selected based on the total amperage of the WarmlyYours heating system connected to a single thermostat. This information is on the WarmlyYours heating system's installation plan, electrical plan, or UL label. Based on guidelines from the National Electrical Code: loads up to 16 Amps may utilize 12 gauge wire with a 20-Amp breaker, and loads up to 12 Amps - 14 gauge wire with a 15-Amp breaker. Local code and/or other factors may change these guidelines.

Need more help? View support options

One thermostat can control multiple heating mats/cables as long as all the heating elements are using less than 15 amps:

TempZone™ will cover aprx. 120 sq. ft. for 120V systems and 240 sq. ft. for 240V systems on one thermostat.

Environ™ will cover aprx. 150 sq. ft. for 120V systems and 300 sq. ft. for 240V systems on one thermostat.

Slab Heat will cover aprx. 90 sq. ft. for 120V systems and 180 sq. ft. for 240V systems on one thermostat.

Need more help? View support options

All thermostats are mandated at 42" height for handicap accessibility, most private residences are mounted at 52-60".

Please see this video on how to install a WarmlyYours nSpiration Series thermostat.

Need more help? View support options

The ground wire in the floor mat must be connected directly to the ground wire of the supply or to the house ground wire.

Need more help? View support options


Publications and Manuals



Specifications


Logistics

Country of Origin (COO) Malaysia

Identifiers

SKU FACE-SC-FB-ML

Product Dimensions

Weight 0.75 lbs

Videos




Speak to a radiant heating expert


Can’t find what you’re looking for? Create a Support Request