Classic Towel Warmer Switch, HTW


Classic Towel Warmer Switch, HTW
Part Number: TW-RP-SWITCH
This support page provides publications, manuals, specifications, support articles, and common support questions

Create a new Support Request


Support Questions

A WarmlyYours electric towel warmer can't be installed in a tub or shower enclosure. A WarmlyYours electric heated towel rack should be installed at least 24” away from a wet location like a shower, tub, etc. Always install a WarmlyYours electric towel warmer in compliance with all local building and electrical codes.

9 people found this helpful.  Did you find this helpful? Yes No

Yes. WarmlyYours towel warmers are to be installed in accordance with the instructions in the manual and CEC, NEC, and local code guidelines relating to electrical fixtures in bathrooms. A towel warmer with a hardwired connection must be on a GFCI-protected circuit and be wired by a professional who is certified to do electrical wiring. Towel warmer models with plug-in connections should be used with a GFCI outlet. 

7 people found this helpful.  Did you find this helpful? Yes No

Yes, regular (non-dimming) light switch can be used as an external switch to control a towel warmer in addition to a built-in switch on the towel warmer itself. A GFCI breaker powering the switch may be required by local Electrical Code.

2 people found this helpful.  Did you find this helpful? Yes No

The dash represents the "on" position because it signifies a closed circuit, allowing power to flow. The O represents the "off" position, indicating an open circuit where power is disconnected. You can further identify the on/off state of the towel warmer by the LED coming on around the switch when powered.

Did you find this helpful? Yes No


Specifications

Identifiers

SKU TW-RP-SWITCH

Electrical

Voltage 24 V

Product Dimensions

Weight 0.2 lbs


Similar Items

Do you need support or specifications for a specific model? Identify your model below.


Speak to a radiant heating expert


Can’t find what you’re looking for? Create a Support Request