How to Wire A Floor Heating Thermostat
Effortless Thermostat Setup for Radiant Heating Systems
Have you ever dreamed of stepping onto a toasty warm floor during those chilly winter mornings? Your dream is within reach, and it won't cost a fortune!
Our expert, Scott, guides you through the seamless installation of the TH115 thermostat with the TempZone Twin Conductor heating roll. Not only will you save on professional installation costs, but you'll also enjoy the enhanced comfort and efficiency of radiant floor heating.
In this video, we delve into every step needed for a successful setup:
- ✅ Simple wire connections with color-coded guidance for error-free installation
- ✨ Understanding the difference between 120-volt and 240-volt systems for optimal safety
- 💡 Proper grounding techniques to ensure system longevity and safety
- ⚡ Compatibility insights for integrating with your current home's electrical system
By following these tried-and-true methods, you can enjoy the luxurious warmth of radiant floors and potentially lower your energy bills. For more detailed guidance, check out our video and explore our radiant floor heating solutions.
Transcript
Hi, I'm Scott from WarmlyYours. Today, we're going to connect our TH115 thermostat with the new TempZone Twin Conductor heating roll. The color coding of the wires makes this process straightforward. We will connect the two wires from the heating roll to the two wires labeled "load" on the back of the thermostat.
Looking at our TH115 series thermostat, we can see there are four wires: two red and two black. The top and bottom wires are the line supplies coming from your circuit breaker box. In a 120-volt system, one wire serves as the neutral, while the other is the line. In a 240-volt system, both wires are hot. The two wires in the center—the bottom red and the top black—will connect to the corresponding wires from your floor heating system.
Now, we are ready to pair the wires from the floor with those from the thermostat. This is a simple operation. You will notice that there is a red and a black wire coming from the floor, along with a ground wire. This ground wire must be connected to the ground wire located in the box where the thermostat is mounted. To make the connections, simply tie the red wires together and the black wires together. Additionally, ensure that the ground wire is attached to the ground wire in the box.
That's how easy it is to install the new TempZone Twin with our TH115 series thermostat. If you have any further questions, feel free to give us a call at 1-800-875-285 or visit us online at warmlyyours.com. Thank you for watching!
Bonjour, je suis Scott de WarmlyYours. Aujourd'hui, nous allons connecter notre thermostat TH115 au nouveau rouleau chauffant TempZone à double conducteur. Le code couleur des fils rend ce processus très simple. Nous allons connecter les deux fils du rouleau chauffant aux deux fils étiquetés " load " (charge) à l'arrière du thermostat.
En regardant notre thermostat de la série TH115, nous pouvons voir qu'il y a quatre fils : deux rouges et deux noirs. Les fils du haut et du bas sont les fils d'alimentation provenant de votre boîtier de disjoncteur. Dans un système de 120 volts, un fil sert de neutre, tandis que l'autre est la ligne. Dans un système de 240 volts, les deux fils sont chauds. Les deux fils du centre - le rouge en bas et le noir en haut - seront connectés aux fils correspondants de votre système de chauffage par le sol.
Nous sommes maintenant prêts à relier les fils du plancher à ceux du thermostat. C'est une opération simple. Vous remarquerez qu'il y a un fil rouge et un fil noir provenant du plancher, ainsi qu'un fil de mise à la terre. Ce fil de terre doit être connecté au fil de terre situé dans la boîte où est monté le thermostat. Pour effectuer les connexions, il suffit d'attacher les fils rouge et noir ensemble. Veillez également à ce que le fil de terre soit relié au fil de terre de la boîte.
Voilà comment il est facile d'installer le nouveau TempZone Twin avec notre thermostat de la série TH115. Si vous avez d'autres questions, n'hésitez pas à nous appeler au 1-800-875-285 ou à nous rendre visite en ligne à warmlyyours.com. Merci d'avoir regardé cette vidéo !
Hola, soy Scott de WarmlyYours. Hoy vamos a conectar nuestro termostato TH115 con el nuevo rollo calefactor TempZone Twin Conductor. El código de colores de los cables hace que este proceso sea sencillo. Conectaremos los dos cables del rollo calefactor a los dos cables etiquetados como "carga" en la parte posterior del termostato.
Observando nuestro termostato de la serie TH115, podemos ver que hay cuatro cables: dos rojos y dos negros. Los cables superior e inferior son los suministros de línea procedentes de su caja de disyuntores. En un sistema de 120 voltios, un cable sirve como neutro, mientras que el otro es la línea. En un sistema de 240 voltios, ambos cables son calientes. Los dos cables del centro, el rojo de abajo y el negro de arriba, se conectarán a los cables correspondientes del sistema de calefacción por suelo radiante.
Ahora, estamos listos para emparejar los cables del suelo con los del termostato. Se trata de una operación sencilla. Observará que hay un cable rojo y otro negro procedentes del suelo, junto con un cable de tierra. Este cable de tierra debe conectarse al cable de tierra situado en la caja donde está montado el termostato. Para realizar las conexiones, simplemente ate los cables rojo y negro entre sí. Además, asegúrese de que el cable de tierra está conectado al cable de tierra de la caja.
Así de fácil es instalar el nuevo TempZone Twin con nuestro termostato de la serie TH115. Si tiene más preguntas, no dude en llamarnos al 1-800-875-285 o visítenos en línea en warmlyyours.com. Gracias por vernos
Cześć, jestem Scott z WarmlyYours. Dzisiaj podłączymy nasz termostat TH115 do nowego przewodu grzejnego TempZone Twin Conductor. Kodowanie kolorami przewodów sprawia, że proces ten jest prosty. Podłączymy dwa przewody z rolki grzewczej do dwóch przewodów oznaczonych jako "obciążenie" z tyłu termostatu.
Patrząc na nasz termostat z serii TH115, widzimy, że są cztery przewody: dwa czerwone i dwa czarne. Górny i dolny przewód to przewody zasilające pochodzące z wyłącznika automatycznego. W systemie 120-woltowym jeden przewód służy jako neutralny, podczas gdy drugi jest linią. W systemie 240 V oba przewody są gorące. Dwa przewody na środku - dolny czerwony i górny czarny - zostaną podłączone do odpowiednich przewodów systemu ogrzewania podłogowego.
Teraz jesteśmy gotowi do sparowania przewodów z podłogi z przewodami z termostatu. Jest to prosta operacja. Zauważysz, że z podłogi wychodzi czerwony i czarny przewód, a także przewód uziemiający. Ten przewód uziemiający musi być podłączony do przewodu uziemiającego znajdującego się w skrzynce, w której zamontowany jest termostat. Aby wykonać połączenia, wystarczy połączyć ze sobą przewody czerwony i czarny. Dodatkowo należy upewnić się, że przewód uziemiający jest podłączony do przewodu uziemiającego w skrzynce.
Oto jak łatwo jest zainstalować nowy TempZone Twin z naszym termostatem serii TH115. Jeśli masz dodatkowe pytania, zadzwoń do nas pod numer 1-800-875-285 lub odwiedź nas online pod adresem warmlyyours.com. Dziękujemy za oglądanie!