24ʺ Brushed Towel Holder Bar for Ember Radiant Heating Panels (Excludes IP-EM-FLX-WHT-0300-CW)
- Helps turn an Ember infrared heating panel into a towel warmer too
- Comes with an attractive brushed finish
- Compatible with all portrait-oriented Ember infrared heating panels except the 35” x 12” Ember Flex Panel
- Up to two towel bars can be installed per Ember infrared heating panel
- Made of durable and rustproof aluminum
Ember Towel Warmer Bar Description
If you’re looking to add some warmth to your bathroom with the added function of warming your towels at the same time, look no further than flat towel bars for Ember infrared heating panels.
This towel bar is made of anodized aluminum with a brushed finish which is attractive, easy to clean, and it helps disguise any accidental scratches. Anodizing the aluminum also makes the accessory even more durable and rustproof.
The Ember panel must be wall-mounted with a portrait orientation (with the longest dimension installed vertically) to work with these accessories. Up to two towel bars can be installed per Ember infrared heating panel. To keep installation simple, the towel bars can be quickly and easily attached to holes located on the backside of the vertically mounted panel. For 47” x 24" models the 2 mounting points are 16 3/4” from top and bottom of the panel. For 35” x 24" models, the 2 mounting points are 9” from the bottom and top of the panel.
Once the bars are secure, the comfort of toasty warm towels is only minutes away!
This accessory works with all Ember radiant heating panels excluding the 35” x 12” Ember Flex Panel (IP-EM-FLX-WHT-0300-CW).
Specifications
Appearance
| Color | Metallic |
| Material | Brushed anodized rustproof aluminum |
Product Dimensions
| Depth | 26.38″ |
| Height | 1.97″ |
| Weight | 1.5 lbs |
| Width | 4.72″ |
Identifiers
| SKU | IP-EM-ACC-BAR |
| UPC (GTIN-12) | 881308042493 |
Frequently Asked Questions
Showing all 5 questions
Radiant heat travels through air, and typically heats up objects closer to the panel first and then the rest of the room later. Infrared heating from the panel can be easily detected from about 3-4 feet. Ideally, the infrared heating panel should be aimed onto the area with more use, since that will be the surface that will warm up first.
Only the Ember Flex infrared heating panels can be mounted from the ceiling and they come with all of the necessary hardware to accomplish this.
None of the infrared heating panel heaters from the Ember Glass or Ember Mirror lines can be mounted from the ceiling.
The startup heating time for this infrared heating system is approximately 5 to 10 minutes. However, your room will not feel warmer immediately because the cold objects in the room (furniture, walls, ceilings, floors, etc.) need to warm up first. Once these surfaces are heated via infrared heating, the warmth will spread throughout the room.
