1/2ʺ Single-Gang Mud Ring


1/2ʺ Single-Gang Mud Ring

$5.99





Support Page

Description

This single-gang mud ring was designed to house and protect electrical wiring. It accommodates ½-inch drywall thickness, features a pre-galvanized steel construction, and offers pre-tapped device-mounting holes. It is UL and CSA listed and acceptable for use in two-hour fire-rated walls and ceilings.

Specifications

Identifiers

SKU FHE-ROUGH-IN-MUD
UPC (GTIN-12) 881308046125

Customer Questions & Answers

Parts has 20 Questions and Answers.

Don't see the answer you're looking for? Post your question

How can I determine what I need for my floor heating project and how can I find out what my floor heating system will cost?

You can use the Instant Quote Tool, which gives you many options for your floor heating coverage. Use this interactive tool to design your room online and receive an instant quotation with product recommendations, rough-in and installation kits, cost of your control, etc. Planning your floor heating project is made easy when using our Instant Quote Tool.

Send us your floor plan or fax it to (800) 408-1100 and we will send you a quote, product recommendation and a free custom installation plan for your project.

15 people found this helpful.  Did you find this helpful? Yes No

What type of flooring can I install along with an electric floor heating system?

WarmlyYours’ TempZone™ product is most commonly installed under tile, stone, and marble flooring, but can also be installed under many other popular floor covering options such as hardwood, vinyl and linoleum. We also have our Environ system, which is an electric floor heating product as well and is specially designed for installation under carpet (in the U.S. only), laminate and floating wood. WarmlyYours can accommodate any flooring type with either of the electric radiant floor heating products that we offer. If your flooring type isn't listed here, just give us a call at (800) 875-5285 and we will be happy to discuss it with you.

10 people found this helpful.  Did you find this helpful? Yes No

If I have extra cold lead wire, can I trim off what I don't need for my installation?

Yes. Unlike the heating cable for electric floor heating, the cold lead wires can be trimmed or lengthened with additional lead wire which can be purchased from WarmlyYours.

7 people found this helpful.  Did you find this helpful? Yes No

How do I know if I am installing my electric floor heating system properly?

Please keep in mind that you must check your electric floor heating system with a digital ohmmeter in conjunction with a Circuit Check™. Take an initial reading as soon as you take the product out of the box to verify that it is within -5% / +10% of the values stated on the product’s label. This will give you a basis of comparison for future readings. Take a second reading once you have positioned the system to match your custom installation plan. It is also advisable to take an additional reading in the middle of the tile installation, just to make sure that the Circuit Check™ is doing its job. Then, take a final reading when you are finished with the floor installation and are ready to hook up the thermostat.

The Circuit Check™ is a tool developed by WarmlyYours to give you peace of mind and ensure trouble-free installations. Simply hook up the cold leads to the tool while you position the system to match your custom installation plan.

The Circuit Check™ will continuously monitor the continuity of the circuit during the installation of your system and during the installation of your flooring. The Circuit Check™ beeps immediately when a short in the system is detected, alerting you to a potentially damaged cable in the area you are working, before you lay the tile over the electric floor heating system.
 The WarmlyYours technical support team is available 24/7 to provide assistance if the alarm sounds, or if you would have any questions during your installation.

6 people found this helpful.  Did you find this helpful? Yes No

Can I use electric floor heating as a primary heat source?

Yes, in most cases, an electric floor heating system can be effective as a primary heat source. However, our TempZone™ and Environ™ systems are most commonly used as a secondary heat source, providing floor-to-ceiling radiant heat to any room in your home where you desire more warmth and comfort.

If you are considering electric floor heating for an addition to your home, such as a sunroom where you have no other source of heat, WarmlyYours offers an innovative online tool which calculates approximate heat loss. This tool can help you to determine if a WarmlyYours’ electric radiant floor heating system will provide your desired comfort temperature throughout the year. You can access the Heat Loss Calculator or you can call us at (800) 875-5285 and a Customer Service Representative will make the calculation for you.

2 people found this helpful.  Did you find this helpful? Yes No

View all 20 Questions and Answers

Customer Reviews

Parts achieved an average rating of 4.9 stars with 55 reviews by our customers.

Have you used this product before? Leave a review

Great customer service

Peter M., Oak Ridge, NJ on 07/08/2022

Great customer service

Great heating system, almost perfect, 4.9 stars

Patrick S., Weymouth, MA on 07/03/2022

I installed this for a small bathroom, 50 sq feet-it has always been cold since it's over a garage. The instructions are very good and all the materials are excellent. Almost perfect except for two small items. 1. The wiring kit should include the conduit elbows, 1 for the cold lead cable going to the box and 1 other elbow for the floor sensor. Since the kit has everything else, would be helpful to add these two small items. Nearly every installation will require using elbows to protect the wires when they make the turn from the floor up to the box. 2. The instructions for the floor heating kit should mention something about making sure to check the instructions for the self leveling compound before laying the wires. In my case, I had laid out the wires on tile following all the instructions in the heating kit, then I bought the self leveling kit compound and realized that I needed to scarify the old tile, and then prime the floor. Then I had to lay the wires back down again. I know, probably user error, but it would be helpful to add something about checking the self leveling compound instructions BEFORE laying the wire for the heating system. Other than that, it's a great system that I think will do well during the cold winter months. TIPS for installers: 1. I used duct tape to hold the wires down reinforced as much as possible with Zip flashing tape. The duct tape failed on the SLC pour in a couple of spots, use Zip tape instead next time. 2. I bought a spare floor sensor and laid it in the floor but didn't wire it. If the current one fails, I only have to cut a hole in the drywall and run it up to the box, don't have to dig up the floor.

Easy to install, easy controls, too!

Laura B., Madison, NJ on 06/13/2022

This product is wonderful. It was easy to install, especially with the line monitor, so that you are always sure you haven't broken a line. The controls are intuitive and easy to operate. I'd put this in another room, for sure!

Caring staff

Anonymous, Mt Pleasant, IA on 06/02/2022

They verified my order before I ordered the products so i got what I needed. Speedy delivery as well

Great Product & Service

Marnie S., Delaware, OH on 05/12/2022

I wanted to remodel my master bath which already had a WarmlyYours heated floor system installed. Since I was replacing the tile flooring, the old system had to be taken up and a new one installed. Mary was great in helping find the previous layout from the original installation and create the updated layout. Mary and everyone else in Tech Support was incredibly helpful and worked with me and my contractor to get the layout right and installed properly. On top of all that, they gave me a great discount as a previous customer upgrading to a newer system.

Easy to install. thermostats look great, Happy Customer !

Sanctuary S., Moss Landing, CA on 04/20/2022

Easy to install. thermostats look great, Happy Customer !

Excellent, as always

Bernadette S., Beaverton, OR on 04/19/2022

We just moved into a 1965 Daylight Ranch near Portland, OR, and the walk-out basement is where my daughter has her bedroom. Since it's on a concrete slab, with a concrete wall on one side, the room was always a bit on the chilly side, and just the slightest bit of dampness in the air. We decided to install the WarmlyYours Environ Flex Roll, as we had done in 2008 back in our home in NY. Back then, it was installed under a travertine tile kitchen floor, and it ended up being a major selling point. The system is easy to install, as there is a layout diagram and complete instructions included. The electricians who came to install the new line and breaker for the floor were so impressed, I believe they are planning a similar installation in their homes. My daughter's bedroom is now cozy and there's no slight dampness anymore. When we remodel the kitchen here, we will absolutely install a WarmlyYours floor heating system.

Great product

Ben S., Bay Point, CA on 03/25/2022

Very happy with the product, great service fair prices, I love working with Laurie Very professional and helpful Thank you!

Great product great service

Bob C., Los Osos, CA on 03/16/2022

We have been working with WarmlyYours for over 20 years and they have provided great products and timely responses. They will service you well.

Not as intimidating as I thought

Anonymous, Hampton, NH on 12/15/2021

Worked with Justin throughout the process and things went very well. Even though there were a few mistakes on my part we were able to work through them. Be sure your layout you provide is accurate!! Submitted a diagram of my new bathroom layout and received the plan for how to layout the mats. After paying, received the kit and instructions. Pretty much follow the instructions. If you are a DIY person with a bit of electric know-how, this is fairly easy. Things to look out for - be sure to use the squawker when laying the mat to assure you don't break it. Have a decent glue gun to hold down any wires when you have to work around something. You can also use the gun to stick the mat better to the floor. An open wall makes the wiring go a lot easier. Otherwise, you need to be proficient in snaking a wire through a wall. The only hiccup was the electric box provided. The thermostat does not fit easily; an extremely tight fit to the point that without a lot of force, I couldn't get it to fit before even trying to install it. Right out of the box, things did not fit easily. There are better and larger plastic boxes you can get at Home Depot or Lowes. It needs to be LONG not wide. My suggestion to WarmlyYours is provide a bigger box or give an option to exclude the package sold without the electric box pieces. All in all - worth the price and the effort.

View all customer reviews