2 9/16ʺ Cable Protector
Made from pre-galvanized steel, this cable protector is used to protect NMSC or raceway wires running through wood studs from accidental nail, screw or drill penetration. ½-inch integral spikes are used to mount the protector plate to the floor plate. The cable protector is 2 9/16 inches long and 1 ½ inches wide. It is UL and CSA listed.
Documents & Manuals
- TempZone™ Custom & Standard Mat Wiring Diagram (English)
- WIRING DIAGRAM 120V & 240V Heating Products with PB112D-GA (English)
- Wiring Diagram for TempZone™ Cut & Turn Single Conductor (Multiple rolls) 120V & 240V with SmartStat™, EasyStat™ and Comfort Regulator (English)
- Wiring Diagram for TempZone™ Cut & Turn Twin Conductor (Multiple Rolls) 120V & 240V with SmartStat™, EasyStat™, Comfort Regulator and Power Modules (English)
Customer Questions & Answers
Parts has 20 Questions and Answers.
How can I determine what I need for my floor heating project and how can I find out what my floor heating system will cost?
You can use the Instant Quote Tool, which gives you many options for your floor heating coverage. Use this interactive tool to design your room online and receive an instant quotation with product recommendations, rough-in and installation kits, cost of your control, etc. Planning your floor heating project is made easy when using our Instant Quote Tool.
Send us your floor plan or fax it to (800) 408-1100 and we will send you a quote, product recommendation and a free custom installation plan for your project.
WarmlyYours’ TempZone™ product is most commonly installed under tile, stone, and marble flooring, but can also be installed under many other popular floor covering options such as hardwood, vinyl and linoleum. We also have our Environ system, which is an electric floor heating product as well and is specially designed for installation under carpet (in the U.S. only), laminate and floating wood. WarmlyYours can accommodate any flooring type with either of the electric radiant floor heating products that we offer. If your flooring type isn't listed here, just give us a call at (800) 875-5285 and we will be happy to discuss it with you.
Yes. Unlike the heating cable for electric floor heating, the cold lead wires can be trimmed or lengthened with additional lead wire which can be purchased from WarmlyYours.
Please keep in mind that you must check your electric floor heating system with a digital ohmmeter in conjunction with a Circuit Check™. Take an initial reading as soon as you take the product out of the box to verify that it is within -5% / +10% of the values stated on the product’s label. This will give you a basis of comparison for future readings. Take a second reading once you have positioned the system to match your custom installation plan. It is also advisable to take an additional reading in the middle of the tile installation, just to make sure that the Circuit Check™ is doing its job. Then, take a final reading when you are finished with the floor installation and are ready to hook up the thermostat.
The Circuit Check™ is a tool developed by WarmlyYours to give you peace of mind and ensure trouble-free installations. Simply hook up the cold leads to the tool while you position the system to match your custom installation plan.
The Circuit Check™ will continuously monitor the continuity of the circuit during the installation of your system and during the installation of your flooring. The Circuit Check™ beeps immediately when a short in the system is detected, alerting you to a potentially damaged cable in the area you are working, before you lay the tile over the electric floor heating system. The WarmlyYours technical support team is available 24/7 to provide assistance if the alarm sounds, or if you would have any questions during your installation.
Yes, in most cases, an electric floor heating system can be effective as a primary heat source. However, our TempZone™ and Environ™ systems are most commonly used as a secondary heat source, providing floor-to-ceiling radiant heat to any room in your home where you desire more warmth and comfort.
If you are considering electric floor heating for an addition to your home, such as a sunroom where you have no other source of heat, WarmlyYours offers an innovative online tool which calculates approximate heat loss. This tool can help you to determine if a WarmlyYours’ electric radiant floor heating system will provide your desired comfort temperature throughout the year. You can access the Heat Loss Calculator or you can call us at (800) 875-5285 and a Customer Service Representative will make the calculation for you.
View all 20 Questions and Answers
Parts achieved an average rating of 4.9 stars with 57 reviews by our customers.
Great customer service
Peter M., Oak Ridge, NJ on 07/08/2022
Great customer service
Great heating system, almost perfect, 4.9 stars
Patrick S., Weymouth, MA on 07/03/2022
I installed this for a small bathroom, 50 sq feet-it has always been cold since it's over a garage. The instructions are very good and all the materials are excellent. Almost perfect except for two small items. 1. The wiring kit should include the conduit elbows, 1 for the cold lead cable going to the box and 1 other elbow for the floor sensor. Since the kit has everything else, would be helpful to add these two small items. Nearly every installation will require using elbows to protect the wires when they make the turn from the floor up to the box. 2. The instructions for the floor heating kit should mention something about making sure to check the instructions for the self leveling compound before laying the wires. In my case, I had laid out the wires on tile following all the instructions in the heating kit, then I bought the self leveling kit compound and realized that I needed to scarify the old tile, and then prime the floor. Then I had to lay the wires back down again. I know, probably user error, but it would be helpful to add something about checking the self leveling compound instructions BEFORE laying the wire for the heating system. Other than that, it's a great system that I think will do well during the cold winter months. TIPS for installers: 1. I used duct tape to hold the wires down reinforced as much as possible with Zip flashing tape. The duct tape failed on the SLC pour in a couple of spots, use Zip tape instead next time. 2. I bought a spare floor sensor and laid it in the floor but didn't wire it. If the current one fails, I only have to cut a hole in the drywall and run it up to the box, don't have to dig up the floor.
Easy to install, easy controls, too!
Laura B., Madison, NJ on 06/13/2022
This product is wonderful. It was easy to install, especially with the line monitor, so that you are always sure you haven't broken a line. The controls are intuitive and easy to operate. I'd put this in another room, for sure!
Anonymous, Mt Pleasant, IA on 06/02/2022
They verified my order before I ordered the products so i got what I needed. Speedy delivery as well
Great Product & Service
Marnie S., Delaware, OH on 05/12/2022
I wanted to remodel my master bath which already had a WarmlyYours heated floor system installed. Since I was replacing the tile flooring, the old system had to be taken up and a new one installed. Mary was great in helping find the previous layout from the original installation and create the updated layout. Mary and everyone else in Tech Support was incredibly helpful and worked with me and my contractor to get the layout right and installed properly. On top of all that, they gave me a great discount as a previous customer upgrading to a newer system.
Easy to install. thermostats look great, Happy Customer !
Sanctuary S., Moss Landing, CA on 04/20/2022
Easy to install. thermostats look great, Happy Customer !
Excellent, as always
Bernadette S., Beaverton, OR on 04/19/2022
We just moved into a 1965 Daylight Ranch near Portland, OR, and the walk-out basement is where my daughter has her bedroom. Since it's on a concrete slab, with a concrete wall on one side, the room was always a bit on the chilly side, and just the slightest bit of dampness in the air. We decided to install the WarmlyYours Environ Flex Roll, as we had done in 2008 back in our home in NY. Back then, it was installed under a travertine tile kitchen floor, and it ended up being a major selling point. The system is easy to install, as there is a layout diagram and complete instructions included. The electricians who came to install the new line and breaker for the floor were so impressed, I believe they are planning a similar installation in their homes. My daughter's bedroom is now cozy and there's no slight dampness anymore. When we remodel the kitchen here, we will absolutely install a WarmlyYours floor heating system.
Ben S., Bay Point, CA on 03/25/2022
Very happy with the product, great service fair prices, I love working with Laurie Very professional and helpful Thank you!
Great product great service
Bob C., Los Osos, CA on 03/16/2022
We have been working with WarmlyYours for over 20 years and they have provided great products and timely responses. They will service you well.
I used WarmlyYours several times and have been impressed
Total P., Wilmette, IL on 03/10/2022
I used WarmlyYours several times and have been totally impressed. They were always on time, the quality of work and materials was the best I have used. The support staff and techs were always available and no question couldn't be answered. The heated floors always worked per their designs with complete enjoyment for all my homeowners. Use them without any questions.