Snow Melt PowerMat 240V, 2 x 30 ft., 60 sq.ft., 12.5A
Features
-
Maximum Heat Output: Approximately 50-watts per sq. ft with 3" cable spacing for fastest snow melting
-
Best for Heavy Snowfall: Recommended for regions with 60+ inches of annual snowfall or when rapid melting is critical
-
Even Heating: Pre-attached heating elements in a serpentine pattern with consistent 3" spacing ensures uniform coverage
-
Fast and Easy Installation: Cut-and-turn design makes installation faster than cables while providing maximum heat density
-
Installation Support: Free SmartPlan™ installation plans, 24/7 phone support, and a 10-year limited warranty
Snow Melt PowerMat Description
WarmlyYours snows melting mats safely and efficiently melt snow and ice from walkways, patios, and driveways. These 2 x 30 ft. 240 V snow melting mats provide 60 ft² of coverage. They feature a sturdy, corrosion-resistant, twin-conductor heating element affixed in a serpentine pattern to a polypropylene mesh backing, allowing for easy installation and even distribution of heat in asphalt, concrete or (mortar underneath) paver surfaces. Equipped with a 20-foot (6m) cold lead, WarmlyYours snow melting mats generate 50 watts per square foot for dependable and efficient snow melting performance and are CSA certified for outdoor use in Canadian and U.S. markets.
Specifications
Electrical
| Amps | 12.5 A |
| Ohms | 19.2 Ω |
| Voltage | 240 V |
| Watts | 3000 W |
| Watts Per Sq. Ft. | 50 |
| Watts Per Sq. Ft. at 3 Inch Spacing | Up to 50 |
Warranty / Certifications
| Approvals | cCSAus Listed |
| Warranty | 10 years |
Performance
| BTU Per Hour | 10236 Btu |
| Heated Coverage | 67.5 ft² |
Product Dimensions
| Cold Lead Length | 20′ |
| Coverage | 60 ft² |
| Heating Element Spacing | 3″ |
| Heating Element Thickness | 5/16″ |
| Height | 0.3125″ |
| Length | 30′ |
| Size | 2′ x 30′ |
| Size and Power | 2x30 ft - 50 W/sq.ft. |
| Weight | 19 lbs |
| Width | 2′ |
Appearance
| Color | Green |
Identifiers
| Product Line Name | PowerMat |
| SKU | WHMA-240-0230 |
| UPC (GTIN-12) | 881308011192 |
Installation
| Surface Types | Asphalt, concrete or in mortar under pavers |
Logistics
| UNSPSC Code | 40101842 |
Installation Plans
This is a real example of an installation plan that uses this product. If you want to design your own room or have any questions, please contact us.
Concrete (new) Subfloor
N/A Voltage
240V Operating Cost
297 cents per hour
This Installation Plan Includes:
Documents
Sell Sheets
Frequently Asked Questions
GFEP is the National Electric Code (NEC) required protection for fixed outdoor deicing and snow-melting equipment, which may be accomplished by using circuit breakers equipped with ground-fault equipment protection (GFEP) of 30 mA. It is important to understand that this required equipment protection is NOT the same as a 5 mA GFCI used for personal protection.
To ensure optimal performance, snow melting heating elements should be installed so that they are consistently 2"-3" from the finished surface. For installations using pavers, the maximum thickness for pavers installed over heating elements is 2.5".
Power requirements are measured in Amps and based on three factors: the watts per sq. ft. of the snow melting cable or mat, the area powered and the voltage used for the application. Our PowerMat product is rated at approximately 50 watts per sq. ft. (with 3" cable spacing), so that is a constant factor. Most snowmelt projects are powered with 240V AC – not all, but most. The one factor that is always variable is the area to be heated/powered. That is based on your project. For a point of reference, let's use the example of a 350 sq. ft. concrete patio.
The formula is (50 W/sq. ft. x area of 350 sq. ft.) / V (240V) = Amps, so 17,500 / 240V = 72.9 Amps