Sydney Towel Warmer, Brushed, Hardwired, 10 bars


Sydney Towel Warmer, Brushed, Hardwired, 10 bars

$499.00

Refurbished Price: $374.25






Support Page

Available on Amazon

  • Generous 10-Bar Design: The Sydney towel warmer uses 10 brushed stainless steel bars to evenly distribute heat, warming up to 2 large towels or bathrobes
  • Hardwired: Wall-mounted with cord-free design, the Sydney hangs beautifully in any bathroom and is hardwired for 120 volts
  • Tempsmart Overheat Protection: This model comes with built-in TempSmart™ overheat protection to prevent the unit’s surface temperature from exceeding 149°F (65°C)
  • Easy To Clean: The straight bars are made with a durable, low-maintenance stainless steel construction
  • 5-Year Warranty: The Sydney is covered by our manufacturer’s warranty for peace of mind

Sydney Description

The Sydney towel warmer from WarmlyYours represents a perfect balance of functionality and stunning design. The tall, slender profile of this model allows for maximum performance without taking up unnecessary wall-space. The Sydney is hardwired (110 – 120 VAC), which means no visible cords or wires once it’s installed and it features 10 heated bars. The impressive heat output of 273 BTUs per hour means this model can not only warm your towels and bathrobes but also dry them between uses. The 304-stainless steel construction and brushed finish makes the Sydney as durable as it is beautiful. This model comes with built-in TempSmart™ overheat protection to prevent the unit’s surface temperature from exceeding 149°F (65°C).

Features:

  • Dimensions: 43.3” (1,100 mm) H x 17” (430 mm) W x 4.3” (109 mm) D
  • 80 watts, heat output of 273 BTUs per hour
  • 10 heated, square bars
  • Brushed finish, 304-stainless steel construction
  • Hardwired connection (110 – 120 VAC) eliminates visible wires
  • Integrated power switch with indicator light
  • Safe: cULus Listed with built-in overheat protection
  • Warranty: 5-years
  • Lifetime technical support from WarmlyYours

Specifications

Electrical

Amps 0.67 A
Connection Method Hardwired
Ingress Protection (IPxx) Rating IP55
Ohms 180 Ohm
On/Off Switch Yes
Voltage 120 VAC
Watts 80 W

Warranty / Certifications

Approvals cULus listed
Warranty 5-year limited warranty

Performance

Average Surface Temperature 122°F / 50°C
BTU Per Hour 273
Heat-up Time 15-20 minutes
TempSmart Safety Limit 149°F - 167°F / 65°C - 75°C
Towel Capacity 1-2

Appearance

Bar Arrangement Evenly spaced
Bar Shape Square
Bar Spacing 3.1875″ and 7.125″
Finish Brushed
Mounting Method Wall Mounted
Steel Type 304-stainless steel
Style Modern
Towel Bars 10-bars

Product Dimensions

Depth 4.33 in
Height 43.3 in
Mounting Footprint 15 ⅝“ (397mm) W x 36 ⅛“ (918mm) H
Width 17 in

Logistics

Package Contents Towel Warmer, installation manual and hardware kit

Identifiers

SKU TWS2-SYD10BH
Towel Warmer Collection Name Classic Collection
UPC (GTIN-12) 881308054908

Customer Questions & Answers

Sydney has 32 Questions and Answers.

Don't see the answer you're looking for? Post your question

Can I install the towel warmer myself or do I need to hire someone to do it for me?

Each towel warmer comes with an instruction manual which fully explains how to install the device from start to finish. If you can hang a picture, you can probably install a heated towel rack. However, for hardwired models, you will need a licensed professional who is certified to do electrical wiring for the final hook-up. 

14 people found this helpful.  Did you find this helpful? Yes No

How do I use the towel warmer after it is installed?

Our towel warmers are designed for everyday use and all of them include an integrated on/off switch. Please note that the Ibiza model includes additional built-in timer options for controlling the unit. WarmlyYours also offers a wide array of controls that can be used with your heated towel rack. Depending on the control you select, you can program the heated towel rack to your schedule or operate it remotely. Just bear in mind that the heated towel rack is designed to gradually warm towels over the course of a day and does work best when towels are left to hang for about 3 hours.

9 people found this helpful.  Did you find this helpful? Yes No

How hot does the towel warmer actually get and is there any possibility of damage?

The heated towel rack will heat up to between 100 and 140 degrees Fahrenheit. It will not produce sufficient heat to injure you if you touch or brush up against it, though you should still exercise caution around the device. Please note that once a heated towel rail is warmed up, the surface temperature will remain constant and can't be adjusted incrementally. 

The heated towel racks have a built-in offset from the wall (the size of the offset will depend on which model you purchased); the offset provides sufficient clearance to prevent any damage to the wall. You should also maintain a distance of four inches between the towel warmer and surrounding fixtures.

Additionally, nearly all of our electric towel warmer models* come with built-in TempSmart™ overheat protection which will shut the unit down automatically if the unit's surface exceeds the safety limit of between 149°F (65°C) and 167°F (75°C).

*Excludes the Elements model.


9 people found this helpful.  Did you find this helpful? Yes No

Does the towel warmer have an automatic shutoff function?

The heated towel rack is designed to stay on at a relatively constant temperature to keep your bathrobes and towels fresh, warm, and dry. However, should you need to turn the unit off for any reason, you can use the integrated on/off switch on the unit. If you’re using a control for your heated towel rack, you may need to shut off the unit there as well. 

Most of our electric towel warmer models* come with built-in TempSmart™ overheat protection which will shut the unit down automatically if the unit's surface exceeds the safety limit of between 149°F (65°C) and 167°F (75°C). 

*Excludes the Elements model. 

6 people found this helpful.  Did you find this helpful? Yes No

How heavy/large are the towel warmers?

Weights vary based on design but typically range from 9 to 29 pounds. Even a larger towel warmer will not be a problem when attaching to the wall. As indicated in the instruction manual, you just need to make sure that at least two of the four brackets are attached to a stud.

5 people found this helpful.  Did you find this helpful? Yes No

View all 32 Questions and Answers
* Example payment is based on the listed product price(s) assuming a 24 month term loan and a 9.99% APR. Subject to approval of credit application. Rates range from 0.00% to 29.99% APR. APRs will vary depending on credit qualifications, loan amount, and term. Bread® pay over time loans are made by Comenity Capital Bank.