Towel Warmer Control
This support page provides publications, manuals, specifications, support articles, and common support questions
Common Support Questions
Yes, most of our wall-mounted towel warmers have a fixed power location in the lower right corner. All of our heated towel racks are electric "dry" (liquid/oil-free) units and most can be installed "upside down". Doing so will result in the power location relocating from the lower right corner to the upper left corner.
Please see the installation video here: https://www.warmlyyours.com/en-US/video-media/towel-warmer-install
Need more help? View support options
A WarmlyYours electric towel warmer can't be installed in a tub or shower enclosure. A WarmlyYours electric heated towel rack should be installed at least 24” away from a wet location like a shower, tub, etc. Always install a WarmlyYours electric towel warmer in compliance with all local building and electrical codes.
Need more help? View support options
Yes. WarmlyYours towel warmers are to be installed in accordance with the instructions in the manual and CEC, NEC, and local code guidelines relating to electrical fixtures in bathrooms. A towel warmer with a hardwired connection must be on a GFCI-protected circuit and be wired by a professional who is certified to do electrical wiring. Towel warmer models with plug-in connections should be used with a GFCI outlet.
Need more help? View support options
WarmlyYours towel warmers are all 120VAC units. Towel warmers are available in wattages from 35 watts all the way up to 250 watts. A single towel warmer would typically range from 1-2 amps based on the model. Wire size and breaker size need to be selected based on the total amperage of the towel warmer(s). For towel warmers installed in bathrooms, a GFCI breaker is required.
Need more help? View support options
Yes, regular (non-dimming) light switch can be used as an external switch to control a towel warmer in addition to a built-in switch on the towel warmer itself. A GFCI breaker powering the switch may be required by local Electrical Code.
Need more help? View support options
A good starting point is to follow the recommendation often provided in the installation manual. The location of your electric towel warmer should take building code, safety, functionality, and aesthetics into consideration. If the towel warmer is mounted too low, towels may drag on the floor, causing tripping or mold issues. Mounting it higher reduces risk of burn, especially for children or those who may accidentally bump into it. If you are unsure what height is best for you, consult your WarmlyYours representative at +1 (800) 875-5285.
Need more help? View support options
Publications and Manuals
Installation
Hardwired 4-Setting Countdown Timer Installation and Operation Instructions DT104 (English)Towel Warmer Hardwired Series TWS3 Vida, Bellagio Installation Manual (English)
Towel Warmer Hardwired Series TWS3 Vida, Bellagio Installation Manual (French)
Towel Warmer Hardwired Series TWS7 Rome Installation Manual (English)
Towel Warmer Hardwired Series TWS7 Rome Installation Manual (French)
Technical Support
TOWEL WARMER SWITCH REPLACEMENT TROUBLESHOOTING (English)Wiring Diagram for Towel Warmers with Hardwired WeMo Wi-Fi Switch (English)
Specifications
Logistics
| Country of Origin (COO) | Canada |
Product Dimensions
| Length | 0.1″ |
| Width | 0.1″ |
Identifiers
| SKU | TW-CON1 |
Electrical
| Voltage | 120 VAC |
Articles
Towel Warmer Not Heating
Towel Warmers and the California Energy Commission (CEC)
Similar Items
Do you need support or specifications for a specific model? Identify your model below.
