The Turn Radius Mistake (One Cable Damage = System Failure)
Avoid cable damage with proper turn radius techniques
Are you worried about damaging your radiant heating cables during installation and facing an angry customer with a failed system?
This essential guide reveals one of the most common and costly installation mistakes: bending heating cables too tightly. A single damaged spot from an improper turn radius can mean no heat, system failure, and expensive callbacks. Understanding proper cable handling techniques is crucial for every successful radiant heating installation.
This video demonstrates the critical importance of turn radius and how to protect your heating cables from damage. You'll discover how WarmlyYours SmartPlan tool helps you prevent these costly errors before you even begin installation, saving you time, money, and customer satisfaction headaches.
In this video, you'll learn essential installation techniques including:
- ⚡ Why sharp bends in heating cables cause permanent damage and system failure
- ✅ How to make wide, smooth turns that protect cable integrity throughout installation
- 💡 The proper turn radius requirements for radiant heating cables
- 🔥 How SmartPlan prevents installation errors before they happen
- 💰 Ways to avoid costly callbacks from damaged heating systems
By mastering proper turn radius techniques and utilizing SmartPlan before installation, you'll ensure every radiant heating system operates flawlessly, keeping customers warm and satisfied while protecting your professional reputation and bottom line.
Transcript
One wrong turn can kill the whole system. If you bend the cable too tight, you can damage it. And one damaged spot means no heat and an angry customer. Make wide, smooth turns, no sharp bends. Plus our SmartPlan prevents costly errors.
Use it before you install.
Un seul mauvais virage peut détruire tout le système. Si vous pliez le câble trop serré, vous pouvez l'endommager. Et un seul endroit endommagé signifie aucune chaleur et un client mécontent. Faites des virages larges et doux, pas de plis serrés. De plus, notre SmartPlan prévient les erreurs coûteuses.
Utilisez-le avant d'installer.
Un giro incorrecto puede arruinar todo el sistema. Si doblas el cable demasiado apretado, puedes dañarlo. Y un punto dañado significa sin calefacción y un cliente enojado. Haz giros amplios y suaves, sin dobleces pronunciados. Además, nuestro SmartPlan previene errores costosos.
Úsalo antes de instalar.
Jeden niewłaściwy zakręt może zniszczyć cały system. Jeśli zegniesz kabel zbyt mocno, możesz go uszkodzić. A jedno uszkodzone miejsce oznacza brak ciepła i niezadowolonego klienta. Wykonuj szerokie, płynne zakręty, bez ostrych zagięć. Ponadto nasz SmartPlan zapobiega kosztownym błędom.
Użyj go przed instalacją.