TempZone™ Easy Mat 120V 2' W x 12' L, 24 Sq. Ft.


TempZone™ Easy Mat 120V 2' W x 12' L, 24 Sq. Ft.




Get an Instant Quote
Support Page

Features

  • 25 Year Warranty

  • 15 Watts Per Sq. Ft

  • Use for targeted spot heating of high-traffic areas to ensure warm floors where you need them most

  • Covered by WarmlyYours’ 25-year No Nonsense Warranty™

  • Can be embedded under a huge variety of floor coverings including tile, marble, stone, and luxury vinyl tile/plank

TempZone™ Easy Mats Description

TempZone™ Easy Mats allow for targeted spot heating of smaller, simpler areas at an affordable cost. Install radiant heating mats in front of your kitchen appliances and bath fixtures for a warm path of under floor heat where you stand the most. Utilizing the TempZone™ technology, Easy Mats are available in 120 volt systems. These under floor mats are perfect for providing radiant spot heating for moderately sized bathroom and kitchen floors or just the high traffic cooking areas of larger kitchens.

Specifications

Electrical

Amps 3 A
Cold Lead Wire Gauge 17 AWG
Floor Load 0.36 kW
Ohms 40 Ω
Ohms Per Ft 0.429 Ohm/ft
Thermal Power 0.36 kW
VOP 65
Voltage 120 V
Watts 360 W
Watts Per Sq. Ft. 15 Watts Per Sq. Ft.

Warranty / Certifications

Approvals cULus listed
Warranty 25 Year Warranty
Wet Location Listed US, Canada

Performance

BTU Per Hour 1228 Btu

Product Dimensions

Cold Lead Length 15′
Coverage 24 ft²
Heating Cable Length 93.29′
Heating Element Thickness 1/8″
Length 12′
Size 2′ x 12′
Width 2′

Appearance

Color Green

Logistics

Country of Origin (COO) India

Installation

Floor Types Commonly installed beneath tile and stone

Identifiers

SKU TRT120-2.0x12
UPC (GTIN-12) 881308062675

Customer Questions & Answers

TempZone™ Easy Mats has 87 Questions and Answers.

Don't see the answer you're looking for? Post your question

How do I work with my electrician to install WarmlyYours electric floor heating?

While WarmlyYours electric radiant floor heating systems are typically installed by your floor covering contractor, a licensed electrician is recommended for the final thermostat hook-up. With every quote, we provide an Installation Plan layout, together with an electrical plan that has all the info required for the electrician.

35 people found this helpful.  Did you find this helpful? Yes No

How can I determine what I need for my floor heating project and how can I find out what my floor heating system will cost?

You can use the Instant Quote Tool, which gives you many options for your floor heating coverage. Use this interactive tool to design your room online and receive an instant quotation with product recommendations, rough-in and installation kits, cost of your control, etc. Planning your floor heating project is made easy when using our Instant Quote Tool.

Send us your floor plan or fax it to (800) 408-1100 and we will send you a quote, product recommendation and a free custom installation plan for your project.

29 people found this helpful.  Did you find this helpful? Yes No

What voltage does WarmlyYours floor heating systems utilize?

The floor heating systems are offered in both 120 volt and 240 volt for the North American market. A 208 volt breaker panel can also accommodate our 240 volt floor heating system. It is important to note that the energy consumption will be the same: a 240 volt system will not cost more to operate than a 120 volt system. You are billed in kilowatts, and the 120 volt and 240 volt systems use the same amount of kilowatts. WarmlyYours often specifies a 120 volt system in smaller projects while a 240 volt system is typically recommended for larger projects (120 square feet of electric floor heating coverage or more). The benefit of switching to a 240 volt system is the reduction in amperage. Our programmable thermostat can control a radiant floor system up to 15 amps. The 120 volt system will reach 15 amps at 120 square feet of electric floor heating coverage. However, the 240 volt system will reach 15 amps at 240 square feet of electric floor heating coverage, allowing a much larger system to be connected to the thermostat. For installations over 240 square feet, a relay contactor or power modules are needed.

22 people found this helpful.  Did you find this helpful? Yes No

Is electric floor heating safe and what about EMF?

Our electric radiant floor heating systems have withstood rigorous safety testing and earned the UL listing. They produce much less EMF than common household appliances like your TV or vacuum cleaner. The EPRI (Electric Power Research Institute) tests all electrical devices and publishes the data. Many common household appliances are tested at a distance of 6 inches. The test results indicate that on average, the EMF emitted for the following appliances, measured in Milligauss (mG) units, is:

Vacuum Cleaner: 300 mG

Microwave: 200 mG

Portable Heater: 100 mG

Dishwasher: 20 mG

Washing Machine: 20 mG

WarmlyYours TempZone™ (Twin): 1.8 mG

26 people found this helpful.  Did you find this helpful? Yes No

What type of flooring can I install along with an electric floor heating system?

WarmlyYours’ TempZone™ product is most commonly installed under tile, stone, and marble flooring, but can also be installed under many other popular floor covering options such as hardwood, vinyl and linoleum. We also have our Environ system, which is an electric floor heating product as well and is specially designed for installation under carpet (in the U.S. only), laminate and floating wood. WarmlyYours can accommodate any flooring type with either of the electric radiant floor heating products that we offer. If your flooring type isn't listed here, just give us a call at (800) 875-5285 and we will be happy to discuss it with you.

24 people found this helpful.  Did you find this helpful? Yes No

View all 87 Questions and Answers