Step into Spa-Like Luxury: A Master Bathroom Transformation in Ann Arbor, MI

This master bathroom remodel gets a cozy and elegant upgrade with a TempZone Flex Roll radiant heating system, turning cold stone floors into a source of consistent warmth.

ANN ARBOR, MI
Master bathroom with double vanity and walkin shower angle ANN ARBOR, MI
Size: 74 sq. ft. Voltage: 120V Wattage: 1103 W Amps: 9 A Flooring: Tile, Marble or Stone Cost/hr *: $0.20

As part of a complete master bathroom renovation in Ann Arbor, Michigan, the homeowners wanted to add a final touch of luxury that would also provide practical comfort during cold Michigan winters. DreamMaker of Ann Arbor solved the challenge of chilly tile floors by installing a 74-square-foot WarmlyYours TempZone™ Flex Roll system. This efficient solution transformed the space, adding significant comfort and value by providing soothing, underfoot warmth.


Project Details

  • Location: Ann Arbor, MI
  • Heated Space Type: Master Bathroom
  • Square Footage: 74 ft2
  • System Specs: 1103 Watts, 120 Volts, 9 Amps
  • Operating Cost: ~$0.20/hr, which translates to ~$0.80/day and less than $25/month (based on 4 hours of daily use).
  • Products Used:

    • TempZone™ Flex Roll
    • SmartStat Programmable Thermostat
    • Circuit Check™


The Story: Adding Comfort to a Custom Remodel

When planning their dream master bathroom, the homeowners in Ann Arbor knew that even the most beautiful marble tile can feel uncomfortably cold, especially on brisk mornings. They partnered with the experts at DreamMaker of Ann Arbor to ensure their extensive remodel included modern comforts that matched the high-end aesthetic of their new double-vanity space. The primary challenge was to integrate a heating solution that was effective, invisible, and efficient.

The installation team selected the WarmlyYours TempZone™ Flex Roll system for its straightforward installation process and reliable performance. The 1.5-foot-wide rolls were easily cut and turned to fit the specific layout of the 74 ft2 bathroom, ensuring complete and even heat coverage. The system was laid out on the wood subfloor before the new marble tile was installed over it. As noted by the project planners, integrating radiant heating requires forethought, and the materials were ordered 6-8 weeks prior to installation to align perfectly with the overall remodeling timeline.

The outcome is a stunning master bathroom where comfort is built right in. The WarmlyYours heated flooring system operates silently and efficiently, gently warming the marble tiles to a pleasant temperature. Controlled by a programmable thermostat, the system provides warmth precisely when needed, enhancing the room's spa-like atmosphere and making it a cozy retreat year-round.


Featured Products

  • TempZone™ Flex Roll: This versatile electric floor heating product features fiberglass mesh backing and heating cable, allowing for simple roll-out installation. It's an ideal solution for providing even, luxurious warmth under tile, marble, or stone floors in rectangular or irregularly shaped rooms.
  • SmartStat Programmable Thermostat: This user-friendly thermostat allows homeowners to easily program heating schedules to fit their lifestyle, ensuring the floors are warm when they wake up and saving energy when they're away. The included floor sensor ensures precise temperature control for optimal comfort and efficiency.
  • Circuit Check™: A small but essential tool that continuously monitors the heating system during installation. It alerts installers to any potential damage to the heating cable, ensuring a perfect installation and peace of mind from start to finish.

* Running this 74 ft2 heated floor system is surprisingly affordable. Based on average electricity rates in Ann Arbor, MI, it costs just about $0.20 per hour to operate. For a typical daily routine, this amounts to less than $0.80 per day (based on 4 hours of use) or under $25 per month for the daily luxury of a warm and inviting bathroom floor.

Project Gallery

Frequently Asked Questions


For a mid-sized master bathroom like this 74 ft 2 project, the electric radiant heating system costs approximately $0.20 per hour to run. When programmed to operate for four hours daily, the monthly cost is typically under $25, making it an affordable luxury for any homeowner in the Ann Arbor area.
While radiant floor heating provides significant warmth and can greatly reduce reliance on other heating systems, whether it can be the sole source of heat depends on factors like ceiling height, insulation, and the number of windows. In this case, it was added for comfort, but a custom heat loss calculation can determine if a system can serve as the primary heat source for your specific space.
The flooring used in this project—marble, tile, or stone—is one of the best choices for radiant floor heating. These materials are excellent thermal conductors, meaning they transfer heat quickly and efficiently from the heating elements to the surface you feel, resulting in a warm and comfortable floor.
Yes, it is a highly energy-efficient heating method. Unlike forced-air systems that lose heat through ducts, radiant heating warms the room and its occupants from the floor up with minimal heat loss. When paired with a programmable thermostat, it allows you to apply heat only when and where it's needed, preventing wasted energy and lowering overall heating costs.

Quotes

These quotes are linked to this showcase and include the products used in this project or recommended for a similar-sized project.

Featured Products

Tell Us About Your Project Our team of Radiant Experts is ready to help.

Contact Us

Have a question? We're here to help.

Add Photo or Floor Plan

By submitting this form, I understand and agree to WarmlyYours.com's Terms of Use and Privacy Policy.

Please complete the security verification below:

Your information is secure and will never be shared