Luxury Warmth for a Master Bathroom in North York, ON

Heated Floors Bring Energy-Efficient Comfort to a Master Bathroom with a TempZone™ Flex Roll System.

NORTH YORK, ON
heated bathroom floor installation near shower enclosure NORTH YORK, ON
Size: 133 sq. ft. Voltage: 240V Wattage: 1192 W Amps: 5 A Flooring: Tile, Marble or Stone Cost/hr *: $0.12

This homeowner in North York, Ontario, desired the ultimate comfort upgrade for their master bathroom, specifically seeking to eliminate the shock of cold tile underfoot. The solution was the installation of an electric radiant floor heating system using the TempZone™ Flex Roll under elegant tile, marble, or stone flooring. This upgrade not only delivers luxurious, energy-efficient floor warming but also significantly enhances the value and daily experience of the home's most personal space.


Project Details

  • Location: North York, Ontario, Canada
  • Heated Space Type: Master Bathroom
  • Heated Square Footage: 54 sq. ft.
  • Room Size (Insulation Surface): 133 sq. ft.
  • Flooring Type: Tile, Marble or Stone
  • System Power: 1192 Watts, 240 Volts, 5 Amps
  • Operating Cost Per Hour: $0.12 (Based on local North York, ON electricity rates)
    • Per Day (8 hours run-time): Approx. $0.96
    • Per Month (30 days): Approx. $28.80

A Comfort Transformation

The challenge in this North York master bathroom was common: beautiful tile that felt perpetually cold, diminishing the luxury experience of the room. The homeowners sought a practical and permanent solution that would provide consistent, gentle heat. WarmlyYours recommended the TempZone™ Flex Roll because it allows for fast, easy installation and provides uniform heat coverage across the 54 square feet of heated space.

Installed directly beneath the tile, marble, or stone flooring, the electric floor heating system transforms the cold surface into a source of gentle warmth, solving the problem of cold tile instantly. The installation was straightforward, with the 240V system connecting to a modern nJoy WiFi Thermostat for precise, programmable control. The result is a truly pampered experience—stepping out of the shower onto a cozy warm floor—all achieved with a highly energy-efficient system that adds long-term value to the Ontario home.


Featured Products

  • TempZone™ Flex Roll (240V) : A pre-sized, pre-wired roll of heating cable on a mesh. Ideal for rectangular areas, speeding up the installation process, and ensuring consistent heat coverage beneath the flooring.
  • nJoy WiFi Thermostat : A programmable, Class A GFCI protected thermostat with Wi-Fi connectivity. Allows homeowners to control and schedule their floor warming system remotely via a smartphone app.
  • Circuit Check : A simple tool that continuously monitors the heating cable during installation, alerting the installer to any accidental damage before the flooring is laid.

* This 54 sq. ft. TempZone™ Flex Roll in-floor heating system, running on 240V, costs just about $0.12 per hour to operate in North York, ON. This translates to an incredibly affordable comfort upgrade of approximately $0.96 per day (assuming 8 hours of run-time) or less than $30 per month

Project Gallery

Quotes

These quotes are linked to this showcase and include the products used in this project or recommended for a similar-sized project.

Frequently Asked Questions


Based on local electricity rates, running this 54 sq. ft. electric radiant floor heating system in a master bathroom costs approximately $0.12 per hour. This makes the upgrade highly affordable, costing around $0.96 for a full day of typical operation, delivering luxurious floor warming without a high utility bill.
Yes, electric radiant floor heating is very energy efficient. Unlike forced-air systems that heat the entire volume of air, this system heats surfaces and objects, operating at a lower temperature to achieve comfortable warmth. Because it is controlled by a thermostat with a floor sensor, it only runs when needed, maximizing energy savings.
The TempZone™ Flex Roll is perfectly suited for use under thermally conductive flooring, such as the tile, marble, and stone used in this North York project. These materials quickly absorb and efficiently radiate the warmth, making them an ideal match for electric in-floor heating and ensuring maximum comfort.
While WarmlyYours systems are primarily designed as a supplemental floor warming source, the 1192-watt system in this master bathroom may provide sufficient heat for a smaller, well-insulated space. However, it is always recommended to perform a heat loss calculation to determine if the system can meet the entire heating requirement for the space.
Tell Us About Your Project Our team of Radiant Experts is ready to help.

Contact Us

Have a question? We're here to help.

Add Photo or Floor Plan

By submitting this form, I understand and agree to WarmlyYours.com's Terms of Use and Privacy Policy.

Please complete the security verification below:

Your information is secure and will never be shared