Snow melt Sample Card (SNOWMELT-SAMPLE-CARD-A)
Part Number: SNOWMELT-SAMPLE-CARD-A
This support page provides publications, manuals, specifications, videos, support articles, and common support questions
This support page provides publications, manuals, specifications, videos, support articles, and common support questions
Jump to
Support Questions
Showing all 1 questions
A 2 pole single-phase 240V circuit works by continuously monitoring the current flowing through both hot wires of the circuit. If it detects even a slight imbalance between the current on each hot wire (indicating a ground fault), it will quickly trip, cutting off power to the circuit. Essentially, it compares each leg of the 240V circuit and trips if they are not precisely equal.
1 person found this helpful
Was this helpful?
Documents
Project Planners
- Asphalt Snow Melt Planning Worksheet (English)
- PRO Resource: Technical Field Guide for Electric Snow Melting Controls, Aerial & In- Slab Sensors, Hold-On Timers, and Pre-Season Commissioning (English)
- Snow Melting Request Quotation Form (English)
- WarmlyYours Snow Melting Field Pocket Guide - Quick Field Troubleshooting Checklist (English)
Sell Sheets
- Outdoor Snow Melting Junction Boxes Sell Sheet (English)
- ZoneBraker Touchscreen Multi-Zone Snow Melting Controller Sell Sheet (English)
Installation
- Retrofit Snow Melting System Application Guide (English)
- Snow Melting Application Cross Sections (English)
Operation Manuals
- SCE-120 Economy Snow & Ice Melt Control User Guide (English)
- ZoneBraker Touchscreen Multi-Zone Snow Melting Controller Manual (English)
- ZoneBraker Touchscreen Multi-Zone Snow Melting Controller Manual (French)
- ZoneBraker Touchscreen Multi-Zone Snow Melting Controller Manual (Spanish)
Wiring Diagrams
Specifications
Identifiers
| SKU | SNOWMELT-SAMPLE-CARD-A |
Product Dimensions
| Weight | 0.0188 lbs |
