TWS-SP-K | Support | WarmlyYours Canada

Common Support Questions

Can the electric towel warmer be installed “upside down” to change the power access point?

Yes, most of our wall-mounted towel warmers have a fixed power location in the lower right corner. All of our heated towel racks are electric "dry" (liquid/oil-free) units and most can be installed "upside down". Doing so will result in the power location relocating from the lower right corner to the upper left corner.

Please see the installation video here: https://www.warmlyyours.com/en-US/video-media/towel-warmer-install

Need more help? View support options

How close can a WarmlyYours electric towel warmer be installed to a shower or tub? Can an electric towel warmer be mounted in a shower enclosure?

A WarmlyYours electric towel warmer can't be installed in a tub or shower enclosure. A WarmlyYours electric heated towel rack should be installed at least 24” away from a wet location like a shower, tub, etc. Always install a WarmlyYours electric towel warmer in compliance with all local building and electrical codes.

Need more help? View support options

Does a towel warmer need to be paired with a GFCI circuit or outlet?

Yes. WarmlyYours towel warmers are to be installed in accordance with the instructions in the manual and CEC, NEC, and local code guidelines relating to electrical fixtures in bathrooms. A towel warmer with a hardwired connection must be on a GFCI-protected circuit and be wired by a professional who is certified to do electrical wiring. Towel warmer models with plug-in connections should be used with a GFCI outlet.

Need more help? View support options

What size wires and breaker will I need for my electric towel warmer?

WarmlyYours towel warmers are all 120VAC units. Towel warmers are available in wattages from 35 watts all the way up to 250 watts. A single towel warmer would typically range from 1-2 amps based on the model. Wire size and breaker size need to be selected based on the total amperage of the towel warmer(s). For towel warmers installed in bathrooms, a GFCI breaker is required.

Need more help? View support options

Can I use a regular light switch to control a towel warmer?

Yes, regular (non-dimming) light switch can be used as an external switch to control a towel warmer in addition to a built-in switch on the towel warmer itself. A GFCI breaker powering the switch may be required by local Electrical Code.

Need more help? View support options

Publications and Manuals

Installation

Sell Sheets

Specifications

Warranty / Certifications

Approvals

cULus listed

Performance

Heat-up Time	15-20 minutes
TempSmart Safety Limit	149°F - 167°F / 65°C - 75°C
Towel Capacity	1-2

Electrical

On/Off Switch	Yes
Voltage	120 VAC

Identifiers

SKU	TWS-SP-K
UPC (GTIN-12)	881308061074

Articles

Towels on towel warmer not heating to expectations
Towel Warmer Not Heating

Related Items

Do you need support or specifications for a specific model? Identify your model below.

0015-59220-0006

Screw, mounting, phillips, round, M5 x 43mm

0015-59820-0002

Insert, circular, stainless, polished, 25mm diameter

0015-59880-0002

Insert, circular, black, 20mm diameter (Tahoe 7, Grande 10, Grande 12, Maple 8)

0015-59890-0003

Pad, foot, rubber, 30mm x 5mm

Similar Items

Do you need support or specifications for a specific model? Identify your model below.

TW-BC-08BS-FS

Barcelona - Plug-In (Free-standing)

TW-BC-08BS-FS2

Barcelona - Freestanding - Plug-in - Brushed

TW-E4PCP

Elements Towel Warmer, Polished Chrome, Plug-in, 4 Bars

TW-F10BS-HP

Infinity Towel Warmer - Dual Connection - Brushed

TW-F10BS-PL

Infinity - Plug-In

TW-F10KS-HP

Infinity - Dual Connection - Black

TW-F10PS-HP

Infinity - Dual Connection - Polished

TWHBX-2639-06BH